Sbloomer Posted October 13, 2019 Share Any idea why my tyres seem to be “bleeding” stans sealant through the sidewalls like this? They’re hardly more than a year old. Link to comment Share on other sites More sharing options...
King_Crispy Posted October 13, 2019 Share Leave them in the sun for half an hour.Rotate them.That should seal the tyre properly from the inside, where the tyre has started to perish a bit. That often happens on tyres that have a weaker sidewall and were designed not to run tubeless Link to comment Share on other sites More sharing options...
Vetseun Posted October 13, 2019 Share I have noticed that with Spez tyres. The sidewalls seem to be very thin. If you ride the tyre a touch soft, the sidewall gets hurt and then the sealant starts weeping out. I have stopped riding these tyres. Warren Melissa Go Riding, Eugéne Alberts and slickjay007 3 Link to comment Share on other sites More sharing options...
Sbloomer Posted October 13, 2019 Share Yeah these are Spez I have noticed that with Spez tyres. The sidewalls seem to be very thin. If you ride the tyre a touch soft, the sidewall gets hurt and then the sealant starts weeping out.I have stopped riding these tyres. Link to comment Share on other sites More sharing options...
Odin775 Posted October 13, 2019 Share This usually happens when you don’t have tubeless ready tires. What tires do you have? Link to comment Share on other sites More sharing options...
Wayne pudding Mol Posted October 13, 2019 Share I’m trying some new tyres, thin sidewalls and exact same issue - thought I was doing something wrong Link to comment Share on other sites More sharing options...
ct_rider Posted October 13, 2019 Share What spez tyres have this sidewall problem? Link to comment Share on other sites More sharing options...
GrahamS2 Posted October 13, 2019 Share What spez tyres have this sidewall problem?Every set of ground controls that I’ve owned had this issue. Even the latest casings do it. Link to comment Share on other sites More sharing options...
Riaan H Posted October 13, 2019 Share Mine did that for almost 7000 km's and other than losing a little bit i sealant it was never an issue. Also, Stans is really thin and tends to do that, other sealants less so. jdwet1980 1 Link to comment Share on other sites More sharing options...
Capricorn Posted October 13, 2019 Share just keep adding more sealant and than normal,and go ride (best way to keep the sealant washing over the whole tyre). Eventually they will seal.Happens with new tyres as well. Like someone else mentioned earlier, TLR or tubeless ready means only the tyre bead is tubeless compatible, NOT the sidewalls. So expect TLR tyres to bleed air, and sometimes sealant as well, via the sidewalls. Edited October 13, 2019 by Capricorn Captain Fastbastard Mayhem 1 Link to comment Share on other sites More sharing options...
Ozzie NL Posted October 13, 2019 Share Mine did that for almost 7000 km's and other than losing a little bit i sealant it was never an issue. Also, Stans is really thin and tends to do that, other sealants less so.Been using Stans for years and never had this issue. Reckon it's Spez thing Tiny K 1 Link to comment Share on other sites More sharing options...
Chrisjanopsyfiets Posted October 13, 2019 Share Also be careful not to overinflate the tyre when trying to seat it the first time. This damages the sidewalls - especially the lighter casings. Link to comment Share on other sites More sharing options...
Chrisjanopsyfiets Posted October 13, 2019 Share Also be careful not to overinflate the tyre when trying to seat it the first time. This damages the sidewalls - especially the lighter casings. Link to comment Share on other sites More sharing options...
scotty Posted October 13, 2019 Share Maxis Crossmark with Stans on my 2 29'ers and 26" commuter, never had an issue with bleeding. Goodbadugly 1 Link to comment Share on other sites More sharing options...
Renier82 Posted October 13, 2019 Share Had the same issue on racing Ralph's, now inly sticking to maxxis with their bulletproof sidewalls Link to comment Share on other sites More sharing options...
Captain Fastbastard Mayhem Posted October 13, 2019 Share Been using Stans for years and never had this issue. Reckon it's Spez thingNope. It's a thin / porous sidewall thing. You see the same with most TLR or Tubeless Ready tyres with this sidewalls. This would include Maxxis's EXO casing, Spaz'z Control & S Works casings, and pretty much any casing that isn't their strongest variety. OP's tyre also seems to have been run at a slightly lower pressure than required, due to those striations in the sidewall that generally occur when the tyre has been rolling (squirming) under load. It will seal properly with more sealant, as Capricorn says. It's par for the course with the porosity of some casings. DieselnDust and seven 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now