Boast about your latest purchases here...

[niterider]

 

Feedback on those please! I'm very close to getting some too

[Lord Catapult]

Feel a little inferior posting this, having checked the other posts out. However, I'm proud of her........... ;-) taking her home from ccGallery in Umhlanga.

 

Never feel inferior, you ride a Momsen

[Lord Catapult]

I have had this for a while, but I think its time to show her

 

 

My frame

 

 

Complete bike

[enjoi]

Nice! Yeah would also like a review on these when you have a chance.

[Izak]

Let's see if we can get those XO brakes sorted out with these puppies and some organic pads.

[Bizkit031]

Let's see if we can get those XO brakes sorted out with these puppies and some organic pads.

Where you get those?

[shaper]

Where you get those?

http://dialdbikes.co.za/dartmoor-rotor-bolts-clone.html

[Izak]

Where you get those?

http://www.pinned.co.za/dartmoor-nano-rotor.html

Edited July 17, 2014 by Izak

[PeterF]

Finally after 5 weeks my parts have arrived from CRC, now I can complete my 1x10 conversion. Received the OneUP 40t cassette ring about 2 weeks ago.

 

[Hairy]

Finally after 5 weeks my parts have arrived from CRC, now I can complete my 1x10 conversion. Received the OneUP 40t cassette ring about 2 weeks ago.

 

Scott MC, lekker bike. Had a frame just like that, called her big red

[PeterF]

Scott MC, lekker bike. Had a frame just like that, called her big red

 

Yes a lekka bike, I just love riding her. Can't wait for my first ride with the 1x10. I haven't ridden with grip shifters for about 15 years so that's going to take some getting used to as well. I want to fit a angle headset sometime as well to slacken the HA just a bit, then I might never ride my 29'er again.

[PeterF]

All done, shifts beautifully. Might have to take 1 or 2 links out the chain, will take her on the trails first. She must be the most pimped Scott Genius.

 

[NotSoBigBen]

Bought a narrow wide chain ring from Kiwi recently, fitted and tested on a bumpy route at Rietvlei and it was so damn schweet! Wasn't too sure about running no chain guide and a non clutch derailleur but it worked!

 

 

[Bizkit031]

 

 

Yes a lekka bike, I just love riding her. Can't wait for my first ride with the 1x10. I haven't ridden with grip shifters for about 15 years so that's going to take some getting used to as well. I want to fit a angle headset sometime as well to slacken the HA just a bit, then I might never ride my 29'er again.

Just ordered a Cane creek angle set just waiting for it now.

[Captain Fastbastard Mayhem]

Clue... it's on the front. 2009 Marzo 66 rc3

 

I'm gonna keep my lyrik as a spare, or sell the one I decide not to use.

 

The marzo has the updated stanchions and seals for those of you who remember their 2008/2009 options has issues.

 

Yes, it's FLIPPIN heavy (3.2kg vs the 1.8kg of the lyrik) but it's a 180mm with thick ass stanchions and my front end was a bit too light with my current setup (super short stem and slack head angle which is just going to get slacker)

 

Oh. And it'll take a 650 wheel with high volume tire with EASE.

Edited July 19, 2014 by cpt armpies mayhem

[Matchstix]

Always love the Marzo's most of the problems was 08 that I knew of. . And I knew them intimately.