porqui Posted October 17, 2016 Share Think I'll try this one, as suggested. I must say this little side project had me giggling like a kid again when the prototype worked as planned this morning Will post pics and vids once the final product is ready ... should be this week still.decrease-friction-m5.jpg Superglue will eventually fail - epoxy is the only way to go. You could try a product called "Sticks like sh.. ". Yes that is what it is called just finish the last word. Link to comment Share on other sites More sharing options...
porqui Posted October 17, 2016 Share To those who would like to know more about PVA on MDF I'm back home in a week and a half at present doing a job in the Namibian desert near Aussenkehr. Connectivity hardly intermittent. Link to comment Share on other sites More sharing options...
V12man Posted October 17, 2016 Share Is that the 372 Epidermix? That stuff is strong!yes,and yes Link to comment Share on other sites More sharing options...
Hairy Posted October 18, 2016 Share I find this interestinghttps://www.youtube.com/watch?v=Wl6jh412Jms Link to comment Share on other sites More sharing options...
Ed-Zulu Posted October 18, 2016 Share So what do you call the guy that hacks towards his naked feet with an axe - Meneer! Hairy 1 Link to comment Share on other sites More sharing options...
Pants Boy Posted October 18, 2016 Share Superglue will eventually fail - epoxy is the only way to go. You could try a product called "Sticks like sh.. ". Yes that is what it is called just finish the last word.Sticks like sh is no good - too elastic in the end. Tried superglue on the bushing/washer, been going strong with the whole office abusing it this morning. Like I said, it's added reinforcement for the MDF part so needs some rigidity. I'll see if it fails later, for now I need to get this thing out to market ... out of the 12 guys in my office I've already sold 30 of them Link to comment Share on other sites More sharing options...
mrbaker Posted October 18, 2016 Share Free to a good Hubber home Old school Table saw.Very very solid - will take two guys to pick up.solid metal block table: +/-40mm thick It has been moved outside due to renovations and is starting to rust The motor is solid, but the butcher block will probably need to be replaced as there is a slight wobble in the blade - although it cuts straight enough for general work.Belt is kaput - needs to be replaced.Some extra blades will also be supplied. Collect only - Linden JHB PM me for images if you're keen. Edited October 18, 2016 by mrbaker Bobbo_SA 1 Link to comment Share on other sites More sharing options...
ScottCM Posted October 18, 2016 Share Free to a good Hubber home Old school Table saw.Very very solid - will take two guys to pick up.solid metal block table: +/-40mm thick It has been moved outside due to renovations and is starting to rust The motor is solid, but the butcher block will probably need to be replaced as there is a slight wobble in the blade - although it cuts straight enough for general work.Belt is kaput - needs to be replaced.Some extra blades will also be supplied. Collect only - Linden JHB PM me for images if you're keen.pm sent Link to comment Share on other sites More sharing options...
mrbaker Posted October 18, 2016 Share Wooden doors for sale Solid doors - Montague full glass 3 unused - still in plastic wrapping Price = R700 each Collect in Linden JHB PM for pics... Link to comment Share on other sites More sharing options...
Grebel Posted October 20, 2016 Share Hey Guys Yes, an odd request. I am busy getting things together to build a table and I would like to use mortise and tenon joints. However - double pin marking gauges start at R900. A plastic single pin costs R80. DO any of you have one in your possession that you would be prepared to let me use for the length of my project, or perhaps even donate, or let me buy ? In case you are wondering, this is what they look like. JSDFOO1876-mark-gauge-lg.jpgrosewood-gauge6-larger.jpg Hey Slowbee, How'd that table turn out? Link to comment Share on other sites More sharing options...
Stretched@Birth Posted October 20, 2016 Share Any ideas what wood this is? I'm thinking American Walnut, but the knots are throwing me a little. It was a dunnage block between bundles of Meranti delivered today. Link to comment Share on other sites More sharing options...
V12man Posted October 20, 2016 Share Any ideas what wood this is? I'm thinking American Walnut, but the knots are throwing me a little. It was a dunnage block between bundles of Meranti delivered today.Meranti that has been stored in the weather for a while I think - plane it and see if the colour changes Edited October 20, 2016 by V12man Link to comment Share on other sites More sharing options...
Stretched@Birth Posted October 20, 2016 Share Meranti that has been stored in the weather for a while I think - plane it and see if the colour changesHas been planed, color stays the same. Link to comment Share on other sites More sharing options...
V12man Posted October 20, 2016 Share Has been planed, color stays the same.Interesting - I had thought it might be a bit of Sapele Mahogany given the grain, but the colour is off for that too Link to comment Share on other sites More sharing options...
DJR Posted October 20, 2016 Share Looks like Walnut to me. That "wavy" pattern near the knots are like what you see on the higher quality walnut used for gunstocks but those usually have a finer grain. Colour is also that of Walnut. Edit: 3 very different bits of Walnut I have standing around.....and need to do something about. Edited October 20, 2016 by DJR Stretched@Birth 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now