The "I need something you might throw away" thread

[Barry]

1 hour ago, Dexter-morgan said:

Good morning, I am looking for a Through Axle for a Rock Shox Dia 15 and the length of the axle is 148.

If it is the rounded edges that is a problem. Strip the axle take a needle file and make it square again.

[Mathieu_Schneuwly]

Has anyone got a nice 30.9mm rigid seat post they don't use? 

I have a Thompson elite 31.6mm barely used I'd like to swop for a 30.9mm of similar quality please. 

Preferably Cape Town

[Rouxenator]

That reminds me, I need to import a 30.0mm for my Kona at some stage.

My 12 speed is just broken in now, it developed "breather gaps" between the rollers and the links. Well, I'm calling them that anyways. 

[Daniel R]

Hi

Looking for a Shimano 105 5700 RHS nameplate.

Even if it's a old damaged or scratched one, as long as it can screw in.

TIA

[JJDT]

Looking for hoods for my old 9 Spd Tiagra STI's. This is a while since I noticed that the rubber is sticky and after the weekends wash the rubber is starting to disintegrate.

The only place that stock STI hoods is Evobikes but the closest version is out of stock.

Willing to pay for the items.

[Chadvdw67]

1 hour ago, JJDT said:

Looking for hoods for my old 9 Spd Tiagra STI's. This is a while since I noticed that the rubber is sticky and after the weekends wash the rubber is starting to disintegrate.

The only place that stock STI hoods is Evobikes but the closest version is out of stock.

Willing to pay for the items.

Is it the FlightDeck shifters? Or does that not matter? I have a set of Tiagra FlightDeck shifters, I will check what the hoods look like, if they are still good you can have them, the left shifter is toast, but the right one still works 

[JJDT]

27 minutes ago, Chadvdw67 said:

Is it the FlightDeck shifters? Or does that not matter? I have a set of Tiagra FlightDeck shifters, I will check what the hoods look like, if they are still good you can have them, the left shifter is toast, but the right one still works 

It is the Flightdeck shifters. Thanks for the reply and will wait for your feedback.

[Chadvdw67]

5 hours ago, JJDT said:

It is the Flightdeck shifters. Thanks for the reply and will wait for your feedback.

Still look ok, they are yours if you want them

[JJDT]

16 hours ago, Chadvdw67 said:

Still look ok, they are yours if you want them

Thanks for the effort, will send you a message now.

[Naidy]

On 10/14/2024 at 6:40 AM, Daniel R said:

Hi

Looking for a Shimano 105 5700 RHS nameplate.

Even if it's a old damaged or scratched one, as long as it can screw in.

TIA

Hi. 

Send me a whatsapp around 8 this evening.  I have but just not sure what side. 0741586243

[Daniel R]

20 hours ago, Naidy said:

Hi. 

Send me a whatsapp around 8 this evening.  I have but just not sure what side. 0741586243

Thanks I managed to get one from a local cycle store.

Much appreciated 

[Rouxenator]

I think I might need new pulley gears... these are wearing kinda thin.

[Yochi Brown]

Hi all, I'm looking for a chest heart rate monitor and a speed sensor.

Does anyone have any of these items that they aren't using?

[KB280DT]

Good morning gents,

I'm on the hunt for a freebody for the shimano FH-MT400-B boost rear hub if anyone has one lying around somewhere that they're willing to part with.

[Graham W]

Think it's this one

4 hours ago, KB280DT said:

Good morning gents,

I'm on the hunt for a freebody for the shimano FH-MT400-B boost rear hub if anyone has one lying around somewhere that they're willing to part with.

 

[KB280DT]

1 minute ago, Graham W said:

Think it's this one

 

That looks like it yes. I'll drop you a PM then we can chat further there?