Jump to content

Coffee machine


Recommended Posts

So I tried Moreflavour, Cape Coffee Beans and Colombo.

 

Not available from Cape Coffee Beans or Colombo and no response yet from Moreflavour.

 

@Alouette3 Did you have any luck with that file?

Link to comment
Share on other sites

  • Replies 7.4k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

@Grebel test print done, I'll collect on the weekend and see if it works

[emoji1696]

 

I still need to check my measurements...

Link to comment
Share on other sites

We have success! Slightly different in design but actually an improvement. I did manage to crack the part due to the plastic used to print being fairly hard, so the flex caused when inserting the lip that is supposed to capture the bur cracked the part. It still worked even with the part broken.

I will just get the lip removed in the next print.

 

Send me your details in a PM

post-27175-0-93662800-1554654640_thumb.jpg

Edited by Alouette3
Link to comment
Share on other sites

  • 2 weeks later...

hi guys i have saeco syntia thats giving me an error message, i googled the error code and try to resolve it with no luck, can anyone recommend a person or where the best place would be to send the machine in to be fixed with out costing a fortune (its not a very expensive model). Thanks

Link to comment
Share on other sites

hi guys i have saeco syntia thats giving me an error message, i googled the error code and try to resolve it with no luck, can anyone recommend a person or where the best place would be to send the machine in to be fixed with out costing a fortune (its not a very expensive model). Thanks

The Saeco shop in Rosebank has closed down - I think these guys are their replacement - https://www.coffeeunplugged.co.za/repairs/ - but don't quote me.

Link to comment
Share on other sites

We have success! Slightly different in design but actually an improvement. I did manage to crack the part due to the plastic used to print being fairly hard, so the flex caused when inserting the lip that is supposed to capture the bur cracked the part. It still worked even with the part broken.

I will just get the lip removed in the next print.

 

Send me your details in a PM

 

Great news! Really glad that worked! 

Link to comment
Share on other sites

Any feedback available on the Bialetti moka express pots? Are they worth it? What is the coffee like?

Link to comment
Share on other sites

Any feedback available on the Bialetti moka express pots? Are they worth it? What is the coffee like?

Yes - worth it - fresh coffee and a decent grinder and they make a great setup for home and travel.

 

(unless you like frothed milk drinks that is....)

Link to comment
Share on other sites

Yes - worth it - fresh coffee and a decent grinder and they make a great setup for home and travel.

 

(unless you like frothed milk drinks that is....)

Great thanks! Nope froth does not bother me too much. Just need a setup with repeatable results without too much hassle. (Without breaking the bank). A decent grinder is a must then?

Link to comment
Share on other sites

Great thanks! Nope froth does not bother me too much. Just need a setup with repeatable results without too much hassle. (Without breaking the bank). A decent grinder is a must then?

Grinder is more important than the machine - scroll back and there are lots of discussions on hand grinders in this thread

Link to comment
Share on other sites

Grinder is more important than the machine - scroll back and there are lots of discussions on hand grinders in this thread

Totally agree on this, I have restaurant grade machine at home (back up in case I have a breakdown at work, they don’t store well as far as I’m concerned), but when the grinder gives me *** it’s bad news!

 

You can have the best machine on earth and the best coffee but if you grind it *** it’s *** coffee at a price! Basically like the computer saying, garbage in = garbage out

Link to comment
Share on other sites

Any feedback available on the Bialetti moka express pots? Are they worth it? What is the coffee like?

Just make sure you get the size that you will use most often, the coffee grinds holder has to be filled up for them to work properly, you can't get a 6 cup and only half full it . And by cup they mean espresso shot, so 2 cup is a double shot.
Link to comment
Share on other sites

Just make sure you get the size that you will use most often, the coffee grinds holder has to be filled up for them to work properly, you can't get a 6 cup and only half full it . And by cup they mean espresso shot, so 2 cup is a double shot.

My 8 cup fills a mug nicely.
Link to comment
Share on other sites

Hi, I'm interested in this Jack Espresso Leveler. I know there are similar tools available e.g on CCB but I'm interested in this one particularly. Anyone importing?

jack-adjustable-leveler-58.5mm-black-%5B

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Settings My Forum Content My Followed Content Forum Settings Ad Messages My Ads My Favourites My Saved Alerts My Pay Deals Help Logout