The "I need something you might throw away" thread

[BaGearA]

G

Hi guys

 

 

 

Looooong shot here but I'm looking for A 30.9 Spez seatpost that can accommodate 7x9mm rails (carbon)

 

 

Best option at the local spez store is R3500

 

 

Or any other seatpost(30.9mm or 31.6mm) that can safely clamp 7x9mm carbon rails

 

 

Please spread the word

 

 

I finally found my dream saddle after more than a year of hunting

[Graham W]

G

Hi guys

 

 

 

Looooong shot here but I'm looking for A 30.9 Spez seatpost that can accommodate 7x9mm rails (carbon)

 

 

Best option at the local spez store is R3500

 

 

Or any other seatpost(30.9mm or 31.6mm) that can safely clamp 7x9mm carbon rails

 

 

Please spread the word

 

 

I finally found my dream saddle after more than a year of hunting

[Graham W]

Hi if you have a spez seat post with the tension bolt going through the seat clamp left to right then I might be able to help I swapped one out for alloy clamps

[BaGearA]

Hi if you have a spez seat post with the tension bolt going through the seat clamp left to right then I might be able to help I swapped one out for alloy clamps

Pm'd you

[Graham W]

Seems to be a problem opening the link pm on

Edited September 15, 2020 by Graham W

[NeverNotRolling]

Been looking for a straight steerer air fork for ages but no luck. If anyone has one laying around and wants something for it, please let me know.

[Shwetty]

Looking for the B-axle assembly for an Ultegra 6800 rear derailleur. 

If anyone has an old 'broken' derailleur that could be stripped for the part I'm after, please let me know.

[Skylark]

Does anyone have a 9spd mtb cassette that will take a 75% chain?

[BaGearA]

As mentioned above Graham very graciously helped me out with a clamp but I still need a seatpost

 

I'm looking for the post pictureed below

 

Preferably the alloy one, my local store only has the carbon one and it's absurd

 

 

Fully willing to pay beg borrow and cut your Gras

 

Please pm me if you ha e one or maybe know of someone that has one

[marshace]

Does anyone have a 9spd mtb cassette that will take a 75% chain?

Yes I do have various 9 spd sprockets at various degrees of wear...

Where are you based ?  I am in Brackenfell.

Thx

Eric

[Daniel De Vynck]

Hi, does anyone have a set of slip on knee pads? not the ones with straps.

[ridr]

Looking for a SRAM mtb shifter clamp for my 11 speed GX shifter (thought I had a few in my box of bike things, but must have given them away a while ago). I don't mind the one in the image or the hinged matchmaker type.

Edited October 11, 2020 by ridr

[Alouette3]

Looking for a left side  Problemsolver Mismatch 1.1  Shimano i-Spec B brakes to Sram style shifter. 

With all the x1 conversions, someone must have in the bottom of their tool box?

 

If all else fails, I'll go the 3D printed route

 

[PSYCHOsmurfZA]

Trying my luck here, i have a set of rims i would like to convert from bolt axle to quick release, if anyone has an old set lying around im willing to purchase it from you.

 

Thank you

[Muzzarati]

Hi I'm looking for an old 26" v-brake frame and fork.

[Chadvdw67]

Anybody possibly have some Shimano M7000/8000/9000 brake levers that are leaking and you are not using? Willing to buy them for a reasonable price