MORNE Posted June 17, 2020 Share If the pedal wrench is not an option....the appropriate hex bit for your socket wrench will do a similarly good job (you need the leverage). Not to mention the socket bits are usually way better quality than the average Joe’s rusty mild steel allen key collection haha Prince Albert Cycles 1 Link to comment Share on other sites More sharing options...
Me rida my bicycle Posted June 17, 2020 Share People use allen keys to loosen pedals? Lolwould love to see how you remove my Candy's with that ???? Link to comment Share on other sites More sharing options...
MORNE Posted June 17, 2020 Share would love to see how you remove my Candy's with thatI’d be willing to give it a proper go if you let me? Do these pedals still have to work after removal?Does removal include the threaded part?How sensitive are you about the use of blunt and/or sheer force around your bike?How do you feel about the phrases “lightly used” and “Normal scuff marks” ???? Edited June 17, 2020 by morneS555 Me rida my bicycle 1 Link to comment Share on other sites More sharing options...
DieselnDust Posted June 17, 2020 Share https://www.youtube.com/watch?time_continue=19&v=LFbSBG7jMzY&feature=emb_logo Link to comment Share on other sites More sharing options...
Skylark Posted June 18, 2020 Share What you really need is an impact driver, either pneumatic or cordless and loosen in the correct direction. Prince Albert Cycles and dave303e 2 Link to comment Share on other sites More sharing options...
keithbe Posted June 18, 2020 Share Worst case scenario...take the bike to your lbs. What I couldn't get loose over a long period the technician did in a minute. I like to believe I did all the prep work for the easy removal. Yes, I felt like a tool taking my bike in to get a pedal removed. I now use anti seize grease. Makes life easier. Skylark and Mojoman 2 Link to comment Share on other sites More sharing options...
Yazpeter Posted June 18, 2020 Share This video definitely helped me! Almost brought to tears then stumbled upon this. Slick Nick and Myth 2 Link to comment Share on other sites More sharing options...
quintonb Posted June 18, 2020 Share If you only have an Allen key hex on the pedal shaft then maybe try taking the crank off and holding the Allen key in a vice and using the crank arm itself as leverage to get the pedal off.Obviously making sure you are turning in the correct direction.The crank arm should be longer than your Allen key and you can get a better hold on it. Once you do get the pedal off, make sure to apply some copper slip or anti seize paste to threads.Makes life a whole lot easier going forward. Cappi and DieselnDust 2 Link to comment Share on other sites More sharing options...
Me rida my bicycle Posted June 18, 2020 Share I’d be willing to give it a proper go if you let me? Do these pedals still have to work after removal?Does removal include the threaded part?How sensitive are you about the use of blunt and/or sheer force around your bike?How do you feel about the phrases “lightly used” and “Normal scuff marks”???? ???????????? ???????? Link to comment Share on other sites More sharing options...
MrJacques Posted June 18, 2020 Share When I had a stuck pedal a hit with a mallet helped. The sudden jolt seemed to do the trick. DieselnDust 1 Link to comment Share on other sites More sharing options...
Barry Posted June 18, 2020 Share Try remove the crank arme and place it in a vice with aluminum jaw then correct spanner with a pipe for leverage Link to comment Share on other sites More sharing options...
MudLark Posted June 18, 2020 Share If nothing else works, buy a bottle of Spanjaard Penetrating & Releasing Fluid and let it penetrate over a few days (lie the bike on the side and put the oil on the back of the threads at regular intervals). My experience has been that the Spanjaard stuff will penetrate and release what nothing else will. https://www.spanjaard.biz/product/penetrating-releasing-fluid/ Edited June 18, 2020 by MudLark Link to comment Share on other sites More sharing options...
Barry Posted June 18, 2020 Share If you have no need for the old pedals then strip them down and clamp the axle in a vice turn the crank arm Skylark 1 Link to comment Share on other sites More sharing options...
TNT1 Posted June 18, 2020 Share Hey Guys Bought new look pedals on a lockdown special but now I am sitting with a problem. I was able to remove the right pedal easily but the left pedals is stuck. I have tried Q20, boiling water and a few other tips I found online but it is almost impossible to loosen the left pedal. Are there any other tips you guys can recommend ? Thanks So, have you decided on what new crankset you will treat yourself to? PhilipV, Myth and DieselnDust 3 Link to comment Share on other sites More sharing options...
RocknRolla Posted June 18, 2020 Share When installing Pedals, remember, you don't need to tighten then in JMSP in. Just lightly tight with the allen wrench or pedal spanner. Long Wheel Base, PhilipV, DieselnDust and 3 others 6 Link to comment Share on other sites More sharing options...
WhuYu Posted June 18, 2020 Share When installing Pedals, remember, you don't need to tighten then in JMSP in. Just lightly tight with the allen wrench or pedal spanner.This....................is the important part when installing new pedals.......................... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now