HE-WORKS Posted July 26, 2024 Posted July 26, 2024 4 minutes ago, Renier said: Yes, this is what I meant :). Those components from Intend are very cool, but also very pricey! It looks like about a 65/70k± practice to get one here. We will be Able to order one, but obviously there will be a time restraint. Future services of fork and dial in specialist that will probably lead the fork into a negative(considering it might be better to send it back and forth for all these endeavors to be practiced correctly)light in the future for general use.
Renier Posted July 26, 2024 Posted July 26, 2024 3 hours ago, Bicycle Yard WESTERN CAPE said: It looks like about a 65/70k± practice to get one here. We will be Able to order one, but obviously there will be a time restraint. Future services of fork and dial in specialist that will probably lead the fork into a negative(considering it might be better to send it back and forth for all these endeavors to be practiced correctly)light in the future for general use. Yeah, that is stupidly expensive, more than my entire bike at this point. Thanks, though. I think I'll stick to my Hyrax for the foreseeable future. B-P-C and HE-WORKS 2
Renier Posted August 26, 2024 Posted August 26, 2024 Took this a few weeks ago at the top of Veer factor, not the highest quality photo, but it was an amazing moment to take in the night air on a ride after being cooped up inside for weeks! johnson, justinafrika, Owen_DJ and 1 other 4
henningvr Posted October 16, 2024 Posted October 16, 2024 Picked up my Tig DC from Barry today. I am just sitting here, staring at it, like a fool. Thanks to everyone at Pyga for the excellent service. splat, Ruben101, Owen_DJ and 12 others 15
Scott roy Posted October 25, 2024 Posted October 25, 2024 (edited) Just finished building this up, second hand frame, cranks and the remainder of the XT groupset I had lying around. Brand new fox factory 38, XT brakes on deore 4 pot calipers, MD 35 wheels. The one up 210mm dropper and the bars came with the frame. I do have an XT cassette but unfortunately was unable to get a microcline freehub for these hubs. I do have some new tyres I will slap on shortly. Edited October 25, 2024 by Scott roy El Duderino, johnson, Fred van Vlaanderen and 6 others 9
johnson Posted January 6 Posted January 6 (edited) Hi everybody. Has anyone replaced pivot bearings on a OneTen 29 frame recently ? Mine is due but I would like to purchase the bearings before stripping the bike. Thanks, John. EDIT. Any suggestions where to buy decent quality bearings will be appreciated. Edited January 6 by johnson Adding info.
MORNE Posted January 6 Posted January 6 (edited) 6 hours ago, johnson said: Hi everybody. Has anyone replaced pivot bearings on a OneTen 29 frame recently ? Mine is due but I would like to purchase the bearings before stripping the bike. Thanks, John. EDIT. Any suggestions where to buy decent quality bearings will be appreciated. Edit. Didnt read the oneten sorry. Most the new pygas share the same kits minus one or two bearings. Edited January 6 by MORNE
johnson Posted January 15 Posted January 15 So after a couple of good rides in December I decided now is a good time for the "Bearing Job". I Stripped the bike and disassembled the frame. Removed all the bearings. All the frame parts is already cleaned and some scuffs and scratches polished out. The new bearings are ordered and should arrive on Monday. I Will post again when there are more progress. Spinnaroonie, gerriemtb, Maknash and 3 others 5 1
Fred van Vlaanderen Posted January 15 Posted January 15 35 minutes ago, johnson said: So after a couple of good rides in December I decided now is a good time for the "Bearing Job". I Stripped the bike and disassembled the frame. Removed all the bearings. All the frame parts is already cleaned and some scuffs and scratches polished out. The new bearings are ordered and should arrive on Monday. I Will post again when there are more progress. Love to see it! johnson 1
johnson Posted January 20 Posted January 20 The bearings arrived yesterday. I Fitted them this morning. I Have everything ready for assembly and should have the frame complete by tonight. Hairy, Spinnaroonie and Prince Albert Cycles 2 1
Hairy Posted January 20 Posted January 20 On 1/15/2026 at 7:59 AM, johnson said: So after a couple of good rides in December I decided now is a good time for the "Bearing Job". I Stripped the bike and disassembled the frame. Removed all the bearings. All the frame parts is already cleaned and some scuffs and scratches polished out. The new bearings are ordered and should arrive on Monday. I Will post again when there are more progress. Out of interest, what is the wear and feel of the old bearings now that you have them out of the frame?
johnson Posted January 20 Posted January 20 48 minutes ago, Hairy said: Out of interest, what is the wear and feel of the old bearings now that you have them out of the frame? They are quite bad and the movement feels terrible, especially the two bigger ones on the main swingarm pivot. I Didn't realize how much time has gone by. I Built this bike in November 2018. Since then I have had some health issues and undergone three major surgery's and had a serous head injury a year ago. The combined time the bike was not used in my recovery periods is roughly 30 months. The shock and fork was serviced a couple of times over the years but this is the first time that I replaced the pivot bearings. I've covered roughly 12000km's with it. Hairy 1
johnson Posted January 23 Posted January 23 It's not new........but couch pic anyway ! Got the bike assembled yesterday and did some final touches and tweaks today. Ready for the weekend. Hoping for some good weather. cadenceblur, gerriemtb, Wayne pudding Mol and 6 others 8 1
Tiaan Posted March 2 Posted March 2 Custom Pyga Slakline HP4. Thanks to Knipe Racing and Pyga for all the effort into making this dream build a reality. gerriemtb, Danger Dassie, Pofkat and 4 others 7
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now