Sram GX / XO1 / XX1 12 Speed mileage

[Alouette3]

Have you checked the hanger alignment out of interest

[Jbr]

26 minutes ago, Alouette3 said:

Have you checked the hanger alignment out of interest

no, it's brand new and was working fine with the old chain.

So the spacing is built-in the inner cage, and the sram pulley, just like the garbaruk one is the same on both side around the bearings, no matter which way I put the pulley in it’s not flush against the inside of the cage.

 I'm starting to think screw the garbaruk I'll put the original 2kg cage that at least works 🤣

Before I do that I'll investigate if it's possible to get the derailleur to learn to use it's full range, right now it's not going all the way to the limit screw that is already quite a bit in, that doesn't seem normal, if it was resting further out it would probably solve my problem

Edited March 13, 2024 by Jbr

[michaelbiker]

2 hours ago, Jbr said:

no, it's brand new and was working fine with the old chain.

So the spacing is built-in the inner cage, and the sram pulley, just like the garbaruk one is the same on both side around the bearings, no matter which way I put the pulley in it’s not flush against the inside of the cage.

 I'm starting to think screw the garbaruk I'll put the original 2kg cage that at least works 🤣

Before I do that I'll investigate if it's possible to get the derailleur to learn to use it's full range, right now it's not going all the way to the limit screw that is already quite a bit in, that doesn't seem normal, if it was resting further out it would probably solve my problem

Unrelated question on those Lun wheels, do you know if they came with the spacer when you ordered them? I have a set on their way at the moment and I'd live to fit them as soon as I get them and not have to drive around Cape Town looking for a spacer.

[Jbr]

3 minutes ago, michaelbiker said:

Unrelated question on those Lun wheels, do you know if they came with the spacer when you ordered them? I have a set on their way at the moment and I'd live to fit them as soon as I get them and not have to drive around Cape Town looking for a spacer.

Nope, initially I bought them with the 11spd hub, then I moved my AXS and ordered the XDR hub. I only remembered when you mentionned it that that spacer was needed for the eagle cassette

[droo]

4 hours ago, Jbr said:

no, it's brand new and was working fine with the old chain.

So the spacing is built-in the inner cage, and the sram pulley, just like the garbaruk one is the same on both side around the bearings, no matter which way I put the pulley in it’s not flush against the inside of the cage.

 I'm starting to think screw the garbaruk I'll put the original 2kg cage that at least works 🤣

Before I do that I'll investigate if it's possible to get the derailleur to learn to use it's full range, right now it's not going all the way to the limit screw that is already quite a bit in, that doesn't seem normal, if it was resting further out it would probably solve my problem

It's not the pulley wheel, it's the spacers that fit over the bearings. 3 of them have small holes, 1 of them has a big hole. Fit the one with the big hole over the tit on the cage and the thing will look like the picture with no gaps.

[Jbr]

The caps that cover the bearings on the pulley wheels are all the same, both on the garbaruk and on the gx axs stock cage, maybe on the older mechanical derailleurs there was one a bit deeper, but not on mine

[Chadvdw67]

18 hours ago, Jbr said:

The caps that cover the bearings on the pulley wheels are all the same, both on the garbaruk and on the gx axs stock cage, maybe on the older mechanical derailleurs there was one a bit deeper, but not on mine

Sorry to be that guy, but did you check all four of the washers/spacers? 

[Jbr]

8 minutes ago, Chadvdw67 said:

Sorry to be that guy, but did you check all four of the washers/spacers? 

mmmh only the upper pulleys

[Chadvdw67]

1 minute ago, Jbr said:

mmmh only the upper pulleys

Ding ding ding.... you're welcome 😜

[Jbr]

mmmh indeed, one of the bottom ones has a wider hole, I swapped that one with the inner on my original upper jockey wheel and it sits nicely in the garbaruk cage, let's see. What's weird is that the garbaruk wheels have the same thing (wider hole on the lower/bigger jockey wheel), but those bearing covers can't be removed (not great for servicing), or at least I couldn't take them off. So right now I'm using a sram upper wheel and a garbaruk lower wheel, let's see if it works better. Thanks for the tip, I guess you learn every day 🤣

[Jbr]

It works ! No more delays getting on the 10T cog, thanks okes!

Edited March 14, 2024 by Jbr

[Dividend Papi]

I'm buying a used XX1 cassette with only 950km on it. This whole thread was very helpful in this instance.

[DieselnDust]

1 hour ago, Dividend Papi said:

I'm buying a used XX1 cassette with only 950km on it. This whole thread was very helpful in this instance.

Be careful and ensure you have a

get of jail card. One bad chain can ruin these cassettes so just make sure you can get out of a bad deal 

[dave303e]

4 minutes ago, DieselnDust said:

Be careful and ensure you have a

get of jail card. One bad chain can ruin these cassettes so just make sure you can get out of a bad deal 

IMO chains and cassette fall into the socks, condoms and underwear category.... I would rather go without that use 2nd hand...

[Dividend Papi]

1 hour ago, DieselnDust said:

Be careful and ensure you have a

get of jail card. One bad chain can ruin these cassettes so just make sure you can get out of a bad deal 

Thank you!