Captain Fastbastard Mayhem Posted August 29, 2020 Posted August 29, 2020 Flip, Im more shocked about seeing you on a roadie!Hahaha lol. Got rid of that bike in 2010 or so, bought a carbon Schwinn Peloton, now on a steelie Alpina. DJR and Rocket-Boy 2
patches Posted August 30, 2020 Posted August 30, 2020 Auckland has been in lockdown for the past 3 weeks, and with my building work done, and hardware stores only operating on contactless click-and-collect, I found myself with free time this past weekend so decided to try build a basic postbox (yes, like a Grade 8 high school woodwork type project )with some scraps of 12mm ply I had lying around. Now I'm no master craftsman. Just a desk-jockey with a few tools and some curiosity. Here's the journey so far... First I whipped up a quick 3D design in AutoCAD. Then the actual work started With no table saw, it was down o the track saw to do all the cutting. Takes a bit longer, but the results were pretty decent. It was also a challenge to get all the pieces I needed out of the off shaped scraps I had. Decided to try a little back bevel on the edges for aesthetics. Forgive the burn marks, my feeding of the track saw was a little slow in spots. Assembled and ready for varnishing. Now that we're finally out of lockdown, I can go source a piano hinge for the door at the back. Maybe some numbers for the front. carrera4s, Long Wheel Base, The Ouzo and 3 others 6
Rocket-Boy Posted August 31, 2020 Posted August 31, 2020 Auckland has been in lockdown for the past 3 weeks, and with my building work done, and hardware stores only operating on contactless click-and-collect, I found myself with free time this past weekend so decided to try build a basic postbox (yes, like a Grade 8 high school woodwork type project )with some scraps of 12mm ply I had lying around. Now I'm no master craftsman. Just a desk-jockey with a few tools and some curiosity. Here's the journey so far... First I whipped up a quick 3D design in AutoCAD. Then the actual work started IMG-20200829-WA0001.jpgWith no table saw, it was down o the track saw to do all the cutting. Takes a bit longer, but the results were pretty decent. It was also a challenge to get all the pieces I needed out of the off shaped scraps I had. IMG-20200829-WA0010.jpgDecided to try a little back bevel on the edges for aesthetics. Forgive the burn marks, my feeding of the track saw was a little slow in spots. 20200829_165939.jpgAssembled and ready for varnishing. Now that we're finally out of lockdown, I can go source a piano hinge for the door at the back. Maybe some numbers for the front.Very cool design. The best projects are the ones that you had to work around issues or not having the correct tools to get them done.I love being able to see projects I have made each day when leaving/arriving at home. Hairy and Capricorn 2
carrera4s Posted August 31, 2020 Posted August 31, 2020 I recently restored a No 8 plane I picked up a while ago. I had to make a new tote and thus also made a matching knob as well. It almost make the No 7 look small in comparisson! I can't believe how much quicker and easier it is to get a big piece of wood flat and square with this compared to grandpa's No 7 - i really did not think it would be such a big difference. Before: Capricorn, Ispeed_V, Steven Knoetze (sk27) and 11 others 14
Tuxstir Posted August 31, 2020 Posted August 31, 2020 I recently restored a No 8 plane I picked up a while ago. I had to make a new tote and thus also made a matching knob as well. It almost make the No 7 look small in comparisson! I can't believe how much quicker and easier it is to get a big piece of wood flat and square with this compared to grandpa's No 7 - i really did not think it would be such a big difference. Nr 8 Skaaf 1.jpgNr 8 Skaaf 2.jpgNr 8 Skaaf 3.jpgNr 8 Skaaf 4.jpgNr 8 Skaaf 5.jpgNr 8 Skaaf 6.jpgNr 8 Skaaf 7.jpgNr 7 en 8 Skaaf.jpg Before: Nr 8 Skaaf 8.jpg Nice, I have a No8 Plane that needs restoring, new tote aswell, I'm Just waiting on another project to be completed ( awaiting for some CNC routing work to be done at work ) so I have some Ash off-cut to play with for the tote.The plane is my Grandads, DJR, carrera4s, Hairy and 1 other 4
Rocket-Boy Posted August 31, 2020 Posted August 31, 2020 I recently restored a No 8 plane I picked up a while ago. I had to make a new tote and thus also made a matching knob as well. It almost make the No 7 look small in comparisson! I can't believe how much quicker and easier it is to get a big piece of wood flat and square with this compared to grandpa's No 7 - i really did not think it would be such a big difference. Nr 8 Skaaf 1.jpgNr 8 Skaaf 2.jpgNr 8 Skaaf 3.jpgNr 8 Skaaf 4.jpgNr 8 Skaaf 5.jpgNr 8 Skaaf 6.jpgNr 8 Skaaf 7.jpgNr 7 en 8 Skaaf.jpg Before: Nr 8 Skaaf 8.jpgAbsolutely amazing job! that is probably the best restoration I have seen. Now I really want to drag my no8 out and see if it can be saved, its heavily pitted so probably not. carrera4s and Tuxstir 2
Rocket-Boy Posted August 31, 2020 Posted August 31, 2020 Nice, I have a No8 Plane that needs restoring, new tote aswell, I'm Just waiting on another project to be completed ( awaiting for some CNC routing work to be done at work ) so I have some Ash off-cut to play with for the tote.The plane is my Grandads, It always starts with restoring Grandad's old plane and then gets a little out of hand from there!!Was the same thing with mr Carrera4s and I, he is just a lot better at restoring these days than I am Tuxstir and carrera4s 2
Tuxstir Posted August 31, 2020 Posted August 31, 2020 It always starts with restoring Grandad's old plane and then gets a little out of hand from there!!Was the same thing with mr Carrera4s and I, he is just a lot better at restoring these days than I am Yeah, I kinda get that addiction. its the kind where the AA meeting encourage you to be more addicted.. Rocket-Boy and carrera4s 2
Ed-Zulu Posted August 31, 2020 Posted August 31, 2020 I recently restored a No 8 plane I picked up a while ago. I had to make a new tote and thus also made a matching knob as well. It almost make the No 7 look small in comparisson! I can't believe how much quicker and easier it is to get a big piece of wood flat and square with this compared to grandpa's No 7 - i really did not think it would be such a big difference. Nr 8 Skaaf 1.jpgNr 8 Skaaf 2.jpgNr 8 Skaaf 3.jpgNr 8 Skaaf 4.jpgNr 8 Skaaf 5.jpgNr 8 Skaaf 6.jpgNr 8 Skaaf 7.jpgNr 7 en 8 Skaaf.jpg Before: Nr 8 Skaaf 8.jpgNo 8 ryskaaf ! Pragtig gedoen! I was a skinny kid all my life till I discovered beer, but before then our woodwork teacher used to have quite a laugh when it was my turn to plane the long plants with the No7 or 8. I had to set the depth so shallow to get it going and then had to work hard to get to the line. Now, I can thourgh it around like a champ. carrera4s 1
Bloukrans Posted August 31, 2020 Posted August 31, 2020 My new book case (swart hout ) Tothehills, Long Wheel Base, Captain Fastbastard Mayhem and 9 others 12
Hairy Posted August 31, 2020 Posted August 31, 2020 Auckland has been in lockdown for the past 3 weeks, and with my building work done, and hardware stores only operating on contactless click-and-collect, I found myself with free time this past weekend so decided to try build a basic postbox (yes, like a Grade 8 high school woodwork type project )with some scraps of 12mm ply I had lying around. Now I'm no master craftsman. Just a desk-jockey with a few tools and some curiosity. Here's the journey so far... First I whipped up a quick 3D design in AutoCAD. Then the actual work started IMG-20200829-WA0001.jpgWith no table saw, it was down o the track saw to do all the cutting. Takes a bit longer, but the results were pretty decent. It was also a challenge to get all the pieces I needed out of the off shaped scraps I had. IMG-20200829-WA0010.jpgDecided to try a little back bevel on the edges for aesthetics. Forgive the burn marks, my feeding of the track saw was a little slow in spots. 20200829_165939.jpgAssembled and ready for varnishing. Now that we're finally out of lockdown, I can go source a piano hinge for the door at the back. Maybe some numbers for the front.Am I the only one disapointed that the 3D model was not shown with the new postbox Rocket-Boy and Amberdrake 2
dev null Posted August 31, 2020 Posted August 31, 2020 Absolutely amazing job! that is probably the best restoration I have seen. Now I really want to drag my no8 out and see if it can be saved, its heavily pitted so probably not. The Record No 8 I picked up at a second-hand store end up having a crack on one corner of the mouth. So basically not fixable. As soon as a tighten the blade down the crack opens up. Did not see the crack when I inspected it at the store. Steven Knoetze (sk27) and Rocket-Boy 2
Rocket-Boy Posted August 31, 2020 Posted August 31, 2020 My new book case (swart hout )Very nice, I love the wine storage in the bottom.
Rocket-Boy Posted August 31, 2020 Posted August 31, 2020 The Record No 8 I picked up at a second-hand store end up having a crack on one corner of the mouth. So basically not fixable. As soon as a tighten the blade down the crack opens up. Did not see the crack when I inspected it at the store.Man that sucks. I got mine as part of a bunch of random planes, there were about 40 of them in that batch...Unfortunately it was badly rusted, some of those pits are really deep. I got hold of it with a belt sander to see what was underneath but its not looking good.
dev null Posted August 31, 2020 Posted August 31, 2020 Man that sucks. I got mine as part of a bunch of random planes, there were about 40 of them in that batch...Unfortunately it was badly rusted, some of those pits are really deep. I got hold of it with a belt sander to see what was underneath but its not looking good. Yes well. Gives me an excuse to buy a Lie-Nielsen no 8. One day maybe. When I can afford it. Probably when pigs fly. Rocket-Boy 1
stefmeister Posted August 31, 2020 Posted August 31, 2020 The Record No 8 I picked up at a second-hand store end up having a crack on one corner of the mouth. So basically not fixable. As soon as a tighten the blade down the crack opens up. Did not see the crack when I inspected it at the store. Try and get it welded, or brazed at least if you can't find a competent welder.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now