Dexter-morgan Posted May 30 Share On 5/14/2024 at 4:54 PM, Kom said: Printed this for a fellow hubber - turned out okish - lmk if there are hubbers out there that want something similar for an event they've done - the idea is to mount this in a picture frame. I had this printed through this man, I am very impressed, this will make a unique gift for someone, Kom 1 Link to comment Share on other sites More sharing options...
madmarc Posted May 30 Share On 5/28/2024 at 7:07 PM, ZamaK said: Interesting suggestion indeed... Will explore it. I have fixed 3 Campy FD's like this - I drilled some very small holes (1.0mm) in each part and used some carbon yarn i pulled from a carbon matt from my carbon repair kit and kind of stitched it together - Mixed the resin and dabbed a blob on it and wrapped it in Electrical tape for compression during curing - Once it was cured i filed it down and dabbed a bit of black paint on the repair - Works perfect. Before that i did try the super glue thingy which doesnt work, the superglue don't like sticking to the plastic and broke apart after a few shifts. Link to comment Share on other sites More sharing options...
Barry Posted May 30 Share 29 minutes ago, madmarc said: I have fixed 3 Campy FD's like this - I drilled some very small holes (1.0mm) in each part and used some carbon yarn i pulled from a carbon matt from my carbon repair kit and kind of stitched it together - Mixed the resin and dabbed a blob on it and wrapped it in Electrical tape for compression during curing - Once it was cured i filed it down and dabbed a bit of black paint on the repair - Works perfect. Before that i did try the super glue thingy which doesnt work, the superglue don't like sticking to the plastic and broke apart after a few shifts. The superglue is just to hold the repair/paperclip in place till carbon it applied If you scuff the carbon side of the derailleur then the new carbon will adhere to the old. Find the paperclip adds internal strength and a solid mount on the non carbon side at the main bolt. Edited May 30 by Barry ZamaK 1 Link to comment Share on other sites More sharing options...
Kom Posted June 7 Share This ebike speed sensor magnet mount was quick an easy to do. Spez charge around R300 for the same. (Bikes come standard with centerlock sensor, so needed something for a 6-bolt rotor). Edited June 7 by Kom Sprockets and RustyHWR 2 Link to comment Share on other sites More sharing options...
NotSoBigBen Posted July 5 Share Looking for some free speed? Apparently they make you go faster, think I'll print me one to try 🤓 ChrisF and Kom 2 Link to comment Share on other sites More sharing options...
MongooseMan Posted July 6 Share 19 hours ago, NotSoBigBen said: Looking for some free speed? Apparently they make you go faster, think I'll print me one to try 🤓 Link please, want to print a few as a joke Link to comment Share on other sites More sharing options...
NotSoBigBen Posted July 6 Share 48 minutes ago, MongooseMan said: Link please, want to print a few as a joke https://www.thingiverse.com/thing:3040944 MongooseMan 1 Link to comment Share on other sites More sharing options...
Kom Posted July 20 Share Saturday morning time-sapping, yet gratifying, projects 🫣 Edited July 21 by Kom ChrisF and Sprockets 1 1 Link to comment Share on other sites More sharing options...
Alouette3 Posted July 31 Share Anyone in CT, Southern Suburbs that can print one of these for me? https://www.thingiverse.com/thing:5135813 Link to comment Share on other sites More sharing options...
bebnin Posted July 31 Share 3 hours ago, Alouette3 said: Anyone in CT, Southern Suburbs that can print one of these for me? https://www.thingiverse.com/thing:5135813 I'm looking for an excuse to get the printer going again - will give this a go this evening. I'm in woodstock. Alouette3 1 Link to comment Share on other sites More sharing options...
Alouette3 Posted July 31 Share 2 hours ago, bebnin said: I'm looking for an excuse to get the printer going again - will give this a go this evening. I'm in woodstock. Brilliant, appreciated Link to comment Share on other sites More sharing options...
bebnin Posted July 31 Share 4 hours ago, Alouette3 said: Brilliant, appreciated Printed upside down with supports, thinking that you'd rather have the bottom side that fits onto the shock be smoother and closer to dimension? Lemme know if I must turn is around instead? Will require a little finishing, but this is the result after pulling off the supports. PM and we can organize a pickup. NotSoBigBen and Barry 2 Link to comment Share on other sites More sharing options...
WaynejG Posted August 14 Share Anyone have a print file for this doohickey? Link to comment Share on other sites More sharing options...
Jono Posted August 14 Share 1 hour ago, WaynejG said: Anyone have a print file for this doohickey? Had a little look and came across this https://www.thingiverse.com/thing:6725027 Link to comment Share on other sites More sharing options...
WaynejG Posted August 14 Share 38 minutes ago, Jono said: Had a little look and came across this https://www.thingiverse.com/thing:6725027 Thank you very much Jono 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now