Mongooser Posted December 7, 2017 Posted December 7, 2017 Hi hubbers anyone here have any good tricks to make a bike noiseless/quietI have a DH rig and i want to make it quiet as it can begot 2 chain protectors on the rear triangle already and ductape all around the corners of it to replaced all my bushings to so nothing from my linkage either bike still not quiet enuf random things are making tiny noiseswhat you guys do to silence your rig? like in the vid
karlito Posted December 7, 2017 Posted December 7, 2017 This works pretty wellhttps://www.cogentindustries.co.za/product/chaintamer/
Letum911 Posted December 7, 2017 Posted December 7, 2017 Remove the chain, no chain no chain noise...https://www.youtube.com/watch?v=9B3G2U4O7Kk
Meezo Posted December 7, 2017 Posted December 7, 2017 you are still winning the race for most topics started in 2017, well done!
Karman de Lange Posted December 7, 2017 Posted December 7, 2017 If you can hear your bike, you not going fast enough sorry, not friday yet ?
Jewbacca Posted December 7, 2017 Posted December 7, 2017 If you can hear your bike, you not going fast enough sorry, not friday yet ?hahaha Cole definitely goes fast/hard enough! My secret is being deaf... that way I don't really hear the squeaks and moans unless they are really bad.
PhilipV Posted December 7, 2017 Posted December 7, 2017 Chaintamer will go a long way, clutch derailleur as well. Cables slapping also makes a noise, and it is worse in internally touted frames.
GrahamS2 Posted December 7, 2017 Posted December 7, 2017 Cables slapping also makes a noise, and it is worse in internally touted frames.Not if you build it properly. Spez supply thin foam tubes to shroud the cable housing, which works wonderfully. Should be standard on every bike IMO
MTBeer Posted December 7, 2017 Posted December 7, 2017 Hi hubbers anyone here have any good tricks to make a bike noiseless/quietI have a DH rig and i want to make it quiet as it can begot 2 chain protectors on the rear triangle already and ductape all around the corners of it to replaced all my bushings to so nothing from my linkage either bike still not quiet enuf random things are making tiny noiseswhat you guys do to silence your rig? like in the vid if i could ride like that oke my bike can make as much noise as it likes. But yes I know what you're saying - bike rattling grinds my t!ts as well. Worst place for me is Tree Charge at Conters.
BaGearA Posted December 7, 2017 Posted December 7, 2017 Get a rigid single speed. Quite as a mouseThis ^^^^
Wil6 Posted December 7, 2017 Posted December 7, 2017 Not if you build it properly. Spez supply thin foam tubes to shroud the cable housing, which works wonderfully. Should be standard on every bike IMOInteresting. I suspected the rattle on my duel was from the internal cabling. Going to give this a try thanks
Sepia Posted December 7, 2017 Posted December 7, 2017 Change those expensive hubs with a noise to cheaper noiseless ones
Recommended Posts
Archived
This topic is now archived and is closed to further replies.