Jump to content

Recommended Posts

Posted

Any ideas what wood this is?

 

d09eac72388aa8409c4127610cc93b05.jpg

 

aa2018a11f6f0d2dffccb5a37b475030.jpg

 

I'm thinking American Walnut, but the knots are throwing me a little. It was a dunnage block between bundles of Meranti delivered today.

It could be pecan wood?
  • Replies 6.2k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted

Looks like Walnut to me. That "wavy" pattern near the knots are like what you see on the higher quality walnut used for gunstocks but those usually have a finer grain. Colour is also that of Walnut.

 

Edit: 3 very different bits of Walnut I have standing around.....and need to do something about.

I'm tending to agree with you. It's a nice piece of timber, now to decide what to do with it.
Posted (edited)

Morning.

 

Q&A time.... I have had this piece of timber in my possession for the last 20 years. It belonged to my wife's grandfather and it has a bit of sentimental value. I have an idea what I am going to do with it but would value some input.

 

First though, I have no idea what wood it is  :blush: I have asked a few people and they have no idea...

 

This is what it looks like

 

post-17843-0-57269600-1477290117_thumb.jpg

 

The grain

 

post-17843-0-10828200-1477290120_thumb.jpg

 

post-17843-0-44548500-1477290122_thumb.jpg

 

The bark

 

post-17843-0-98178300-1477290118_thumb.jpg

 

post-17843-0-98545200-1477290123_thumb.jpg

 

Now the intended use... It has a natural curve to it and It is probably about 50mm thick. I am in the process of recycling some Hibay lights to be used in my dining room and I need something to hang them from. I was thinking of squaring this plank off (Trimming the edges to make it rectangular) and hanging the lights from it with longish cables. All wiring will be hidden inside. 

 

The current decor doesn't really lend itself to the natural rustic look or curve of the wood. (TBH I don't want that look in the dining room)

 

Alternatively, leave it as is and use it outside on the patio for the same purpose. I can find another piece of timber for the dining room...

Edited by Grebel
Posted (edited)

Next question... My youngster just started playing mini cricket. We dug out his brother's pl cricket bat and decided to throw some love and attention it's way. It is G&M Icon 100 and supposedly a non oil cricket bat.

 

It was in a sorry state after 10 odd years of school cricket and garden cricket (Pretty sure it was left outside on more than one occasion as well...)

 

I took off all the stickers and proceeded to give it a good scrape to get any glue and stuff off. I then gave it a good going over with the orbital and finished it off with some 600 water paper (used it dry. It was all I have available) to give it a nice smooth finish. 

 

Now the question is.... What do I put on it to protect it? When I was at school, Linseed oil was the way to go. However I recently stumbled across a product called Plascosafe Furniture Lacquer. It is a clear coating that dries to a satin finish. Was thinking of using that...

Edited by Grebel
Posted

Is that not perhaps Jacaranda?

 

That may actually be the closest anybody has come. Had a look at google images and it looks pretty close  :thumbup:

 

Now to decide if I should square it off for the light fitting or not...

Posted

Morning.

 

Q&A time.... I have had this piece of timber in my possession for the last 20 years. It belonged to my wife's grandfather and it has a bit of sentimental value. I have an idea what I am going to do with it but would value some input.

 

First though, I have no idea what wood it is  :blush: I have asked a few people and they have no idea...

 

This is what it looks like

 

attachicon.gif20161022_112343.jpg

 

The grain

 

attachicon.gif20161022_112443.jpg

 

attachicon.gif20161022_112449.jpg

 

The bark

 

attachicon.gif20161022_112418.jpg

 

attachicon.gif20161022_112503.jpg

 

Now the intended use... It has a natural curve to it and It is probably about 50mm thick. I am in the process of recycling some Hibay lights to be used in my dining room and I need something to hang them from. I was thinking of squaring this plank off (Trimming the edges to make it rectangular) and hanging the lights from it with longish cables. All wiring will be hidden inside. 

 

The current decor doesn't really lend itself to the natural rustic look or curve of the wood. (TBH I don't want that look in the dining room)

 

Alternatively, leave it as is and use it outside on the patio for the same purpose. I can find another piece of timber for the dining room...

What about something like this?

 

https://www.facebook.com/floatdesign/photos/a.701292683249300.1073741829.682131485165420/1234324649946098/?type=3&theater

 

Made locally in SA - looks really good as a way to incorporate the aesthetic of curves and wood into modern...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Settings My Forum Content My Followed Content Forum Settings Ad Messages My Ads My Favourites My Saved Alerts My Pay Deals Help Logout