Post your woodwork here

[patches]

Not strictly woodwork, or nearly as skilled as the amazing work of Carrera4s, but this is how I kept myself busy this weekend.

 

First came the lighting...

 

I was granted permission to once again, drill into the nice new kitchen cabinets to install some "tasteful accent lights". The main conditions were:

1. light fittings that are barely noticeable
2. no visible wiring
3. lights should "not look like a kebab shop sign" (ie. densely spaces LEDs, no spotting)

The result...

 

Zigbee 3.0 Smart drivers hidden at the back of the drawers on the inside of the cabinet. (Condition 2, check!)

 

Slim profile alu extrusion, sprayed white and mounted to underside of bench top (Condition 1, check!). I did have to drill a hole in the cabinet facing side of the extrusion, which lines up with the hole through the cabinet and solder new wires onto the LED strip to ensure Condition 2 was still met)

 

Subtle lighting with zero spotting thanks to the 240LED/m strips and frosted diffuser on the extrusion. (Condition 3, check!)

 

The Laundry got the same treatment. The LED strips are the same (4000K neutral colour, but the lit surfaces (maple vs tile) add a huge contrast to how they appear.

 

After playing electrician, I decided to try pimp my table-saw some more.

 

This time in the form of a collapsible, portable floating outfeed table.

 

 

 

 

I made it collapsible to save space and make it more portable (I often use the table saw on the front lawn, especially when I don't want to clean up sawdust).

 

I made it floating as it removes the reliance on level working surfaces. It should always be perfectly flush with the table saw top (or as perfect as I could get it )

 

The hinges (rated to 250kg) were from a folding work bench I picked up for $20 on clearance from a local hardware store. I had to fashion some creative mounting out of plywood, steel brackets, and aluminium angle to fit and level the 2 hinges.

 

The worktop is a layer of 20mm bamboo (the top that came in the workbench kit, cut to size) with some 9mm MDF on top as a sacrificial layer and a lazy way to create the extended mitre slots.

 

Only thing left is to flush trim the MDF to the bamboo and put some protective coating on.

 

As the first part of my compact "voltron-style" workbench I think it came out pretty well!

 

This is the sort of concept I'm going for

 

 

[southafricanrob]

Hi everyone, my trusty belt sander of 10 years died and isn't cost effective to repair so I'm looking for a new one. I realised though that most of the time I use it, I have it mounted upside down on my workbench and am using it as a bench sander, so looking to rather buy one of those instead.

 

I've had a look at both Martlet and Einhell - I've no experience with either so wondering if anyone has had a positive / negative experience?

 

To be honest they look rather like they're made in the same factory and just rebranded!? 375w also seems potentially underpowered although I guess with less weight on it than a traditional belt sander it may be sufficient - any thoughts?

[Stretched@Birth]

Hi everyone, my trusty belt sander of 10 years died and isn't cost effective to repair so I'm looking for a new one. I realised though that most of the time I use it, I have it mounted upside down on my workbench and am using it as a bench sander, so looking to rather buy one of those instead.

 

I've had a look at both Martlet and Einhell - I've no experience with either so wondering if anyone has had a positive / negative experience?

 

To be honest they look rather like they're made in the same factory and just rebranded!? 375w also seems potentially underpowered although I guess with less weight on it than a traditional belt sander it may be sufficient - any thoughts?

I have the Ryobi equivalent as well as the MacAfric from Adendorff which looks pretty much the same as the examples you posted. Don’t underestimate the Ryobi (the blue one), mine has done many hours of constant sanding without trouble. I bought the MacAfric as I needed extra capacity for a big job I was doing, it is quite a bit noisier than the Ryobi and I replaced a bunch of nuts with Nyloc nuts to prevent them rattling loose.

 

As a side note, the Ryobi 150mm disks are about a third cheaper from Makro than they are at Builders, for the same thing. About R180 a packet at Makro. The disks at Adendorff are a lot cheaper, but come in packets of mixed grit, so you end up with disks that don’t get used.

[LOOK695]

This one is on my shopping list. Slight more powerful at 440w

[geomark]

I have the Ryobi equivalent as well as the MacAfric from Adendorff which looks pretty much the same as the examples you posted. Don’t underestimate the Ryobi (the blue one), mine has done many hours of constant sanding without trouble. I bought the MacAfric as I needed extra capacity for a big job I was doing, it is quite a bit noisier than the Ryobi and I replaced a bunch of nuts with Nyloc nuts to prevent them rattling loose.

 

As a side note, the Ryobi 150mm disks are about a third cheaper from Makro than they are at Builders, for the same thing. About R180 a packet at Makro. The disks at Adendorff are a lot cheaper, but come in packets of mixed grit, so you end up with disks that don’t get used.

I've noticed this on a bunch of hardware items, even though they are the same parent company Makro often significantly under cuts Builders

[Hairy]

I've noticed this on a bunch of hardware items, even though they are the same parent company Makro often significantly under cuts Builders

Builders is just a rip off ... you just need to go in accepting this.

 

The other thing about Makro is that they often bring in and sell lap tops for far less that the local agents can sell the same item at wholesale for....this from a friend who makes huge IT purchases for his place of work.

[MTBeer]

Some advice needed from you clever woodworkers. I am in the process of replacing the old steel window frames in my place with nice new wooden ones - nice chunky profile 92mm x 60mm.

 

I want to do architraves around the frames and feel like tackling the project myself. Any good Youtube channels I can search for videos of how to do this?

 

Also essential equipment? Mitre Saw?

 

Anyone in Cape Town want some decent windows / doors made by an old Italian family who do things properly I can recommend Colatruglio and Sons in Durbanville. Absolute quality.

Edited April 22, 2021 by MTBeer

[Hairy]

Some advice needed from you clever woodworkers. I am in the process of replacing the old steel window frames in my place with nice new wooden ones - nice chunky profile 92mm x 60mm.

 

I want to do architraves around the frames and feel like tackling the project myself. Any good Youtube channels I can search for videos of how to do this?

 

Also essential equipment? Mitre Saw?

 

Anyone in Cape Town want some decent windows / doors made by an old Italian family who do things properly I can recommend Colatruglio and Sons in Durbanville. Absolute quality.

Thanks ... their details are noted and will keep them on file!

[Dubber]

~R4k for the bosch blue (tool only). On my endless list of tools.

When in SA I always wanted one of these.  I think Bosch was the only model available at the time - not sure if that has changed.

 

When I got State side I found they were dime a dozen.  Such a useful tool - we use them daily.  Highly recommend...

 

https://www.homedepot.com/b/Search/N-5yc1vZc2b2/Ntk-Extended/Ntt-multi+tool?Ntx=mode+matchpartialmax&NCNI-5

[patches]

Some advice needed from you clever woodworkers. I am in the process of replacing the old steel window frames in my place with nice new wooden ones - nice chunky profile 92mm x 60mm.

 

I want to do architraves around the frames and feel like tackling the project myself. Any good Youtube channels I can search for videos of how to do this?

 

Also essential equipment? Mitre Saw?

 

Anyone in Cape Town want some decent windows / doors made by an old Italian family who do things properly I can recommend Colatruglio and Sons in Durbanville. Absolute quality.

 

Architraves are pretty easy to do and there are a number of decent YouTube resources out there. From the bespoke carpenters to handy DIY tips from hardware stores.

 

As for equipment, a mitre saw will definitely make life easier, but take the time to make sure it's calibrated properly. Assuming they're square out of the box can lead to frustration when cut the mitres as any error will be magnified 6x (2x per side of the architrave) and look terrible.

 

Fixing wise, are you fastening into wooden jambs or brick?

 

If into wood, a finish/brad nailer will make your life a while lot easier. If you already have an air compressor, you can pick one up pretty cheap. Not sire about brick, but I guess it would involve wall plugs, screws and countersinking.

 

Here are a couple of those youtube vids I found handy.

 

SkillBuilder has some great tips on all sorts of carpentry tasks.

 

 

Mitre10 is one the 2 main hardware stores here in NZ. Their "Easy As" videos are great for quick reference

 

 

And just for Hairy, here's the Scott Brown version (Hairy and I are Scott Brown Fans)

 

[Hairy]

Architraves are pretty easy to do and there are a number of decent YouTube resources out there. From the bespoke carpenters to handy DIY tips from hardware stores.

 

As for equipment, a mitre saw will definitely make life easier, but take the time to make sure it's calibrated properly. Assuming they're square out of the box can lead to frustration when cut the mitres as any error will be magnified 6x (2x per side of the architrave) and look terrible.

 

Fixing wise, are you fastening into wooden jambs or brick?

 

If into wood, a finish/brad nailer will make your life a while lot easier. If you already have an air compressor, you can pick one up pretty cheap. Not sire about brick, but I guess it would involve wall plugs, screws and countersinking.

 

Here are a couple of those youtube vids I found handy.

 

SkillBuilder has some great tips on all sorts of carpentry tasks.

 

 

Mitre10 is one the 2 main hardware stores here in NZ. Their "Easy As" videos are great for quick reference

 

 

And just for Hairy, here's the Scott Brown version (Hairy and I are Scott Brown Fans)

 

I actually sent the latest Scott Brown Vid of him hanging pocket sliding doors to a Client last night as she was asking how they do it and blah blah blah ..... the blah blah blah is because I keep giving her details and advise and do not get paid for it

[mazambaan]

This one is on my shopping list. Slight more powerful at 440w

6E92988C-073E-4946-A666-314435C76CFA.jpeg

 

I have the Adendorf one; a bit clunky and crude; heavy as anything but gets the job done (taking off material and de-burring for me), I would say as long as you do not want precision.

[MTBeer]

Architraves are pretty easy to do and there are a number of decent YouTube resources out there. From the bespoke carpenters to handy DIY tips from hardware stores.

 

As for equipment, a mitre saw will definitely make life easier, but take the time to make sure it's calibrated properly. Assuming they're square out of the box can lead to frustration when cut the mitres as any error will be magnified 6x (2x per side of the architrave) and look terrible.

 

Fixing wise, are you fastening into wooden jambs or brick?

 

If into wood, a finish/brad nailer will make your life a while lot easier. If you already have an air compressor, you can pick one up pretty cheap. Not sire about brick, but I guess it would involve wall plugs, screws and countersinking.

 

Here are a couple of those youtube vids I found handy.

 

SkillBuilder has some great tips on all sorts of carpentry tasks.

 

 

Mitre10 is one the 2 main hardware stores here in NZ. Their "Easy As" videos are great for quick reference

 

 

And just for Hairy, here's the Scott Brown version (Hairy and I are Scott Brown Fans)

 

Thanks for the info Patches. I'll be fixing to brick, so yes I guess a screw and wall plug.

[Plentipotential]

I actually sent the latest Scott Brown Vid of him hanging pocket sliding doors to a Client last night as she was asking how they do it and blah blah blah ..... the blah blah blah is because I keep giving her details and advise and do not get paid for it

 

She won't pay you because you keep giving her the advice for free! The general public will not hesitate to pay for advice from a medical or legal specialist but expect free advice from a tradesman because they do not value the trades like they do the medical or say legal profession. (Until the poo starts coming back up the toilet bowl!)

[DJR]

She won't pay you because you keep giving her the advice for free! The general public will not hesitate to pay for advice from a medical or legal specialist but expect free advice from a tradesman because they do not value the trades like they do the medical or say legal profession. (Until the poo starts coming back up the toilet bowl!)

I've got news for you.........

[Rocket-Boy]

Some advice needed from you clever woodworkers. I am in the process of replacing the old steel window frames in my place with nice new wooden ones - nice chunky profile 92mm x 60mm.

 

I want to do architraves around the frames and feel like tackling the project myself. Any good Youtube channels I can search for videos of how to do this?

 

Also essential equipment? Mitre Saw?

 

Anyone in Cape Town want some decent windows / doors made by an old Italian family who do things properly I can recommend Colatruglio and Sons in Durbanville. Absolute quality.

I dont like mitre saws for framing applications, they arent accurate enough for me.

I instead use a picture framing sled on my table saw, the included angles always match up and the joints are always tight.

I think it took me around 30 mins to make that last sled, its not pretty but it does an amazing job.

My wife is an artist so Im forever making frames for her work and its quick and easy.