droo Posted September 21, 2016 Share Here's an idea... make them out of alu, then they'll be a million times stronger. Also, make some way of taking them out when the cap breaks off. That taper is close to impossible to get a grip on. Danger Dassie 1 Link to comment Share on other sites More sharing options...
T-Bob Posted September 21, 2016 Share So weird that people have had issues.. we've had them since they were first available they are still there and I've never had an issue with them coming loose or falling out.[emoji53] Are you guys following the instructions[emoji6] guys... instructions... think there is the issue! Gen 1 Link to comment Share on other sites More sharing options...
MphatiPyga Posted September 21, 2016 Share Really a great idea for a product, mine has saved me and others countless times, but unfortunately gone wondering unexpectedly after trackside knocks. Feel the plastic should perhaps be of a softer more malleable type for the exposed regions and perhaps do the screw in bit as a Alu or similar metal insert as mine have also stripped ( thread tape works ). Love the idea but don't think I will be replacing at current price and longevity Link to comment Share on other sites More sharing options...
Rocket-Boy Posted September 21, 2016 Share When I read the about improvement and them listening to rider feedback I expect first on the list to be improved retention.Didnt find it anywhere, so clearly they didnt listen to rider feedback after all. Link to comment Share on other sites More sharing options...
EmptyB Posted September 21, 2016 Share *** gimmick... Link to comment Share on other sites More sharing options...
slickjay007 Posted September 21, 2016 Share Mine went missing on the first ride! Total waste of money Link to comment Share on other sites More sharing options...
carbon ghost Posted September 21, 2016 Share Mine don't fit inside my carbon bars. Link to comment Share on other sites More sharing options...
V12man Posted September 21, 2016 Share Here's an idea... make them out of alu, then they'll be a million times stronger. Also, make some way of taking them out when the cap breaks off. That taper is close to impossible to get a grip on.just knock it through... There is definitely a way to assemble them incorrectly and then they don't tighten properly - got my partners bike back from a shop after replacing bars and they would not stay in properly for love or money - then put them back together properly and as good as new again - still running my originals after more than 2 years and several falls without issues after.more than 3000km of racing with them Gen 1 Link to comment Share on other sites More sharing options...
Ryno. Posted September 21, 2016 Share The internal diameter of bars differ that's why they work for some but not for others and the developers clearly didn't make sure they can fit the bars with a bigger internal diameter. Edited September 21, 2016 by Ryno. JXV and Bos 2 Link to comment Share on other sites More sharing options...
word Posted September 21, 2016 Share The internal diameter of bars differ that's why they work for some but not for others and the developers clearly didn't make sure they can fit the bars with a bigger internal diameter. Or the ones with a smaller diameter. Cannot fit mine into the Enve bars Link to comment Share on other sites More sharing options...
BluffGrunter Posted September 22, 2016 Share can they improve the way they lock in place? lost mine... popped out during a ride. I've lost 2 . They need to make the left hand one a reverse thread as it comes loose when u pull on the bars Link to comment Share on other sites More sharing options...
Jinga Posted September 22, 2016 Share Still does not justify what they cost. slickjay007 and Sepia 2 Link to comment Share on other sites More sharing options...
Christofison Posted September 22, 2016 Share Strange that people are having such problems with them falling out. Mine have only ever fallen out once and that's because my bars clipped a wire fence. I have fallen too many times to count, the Sahmurai Swords are super scratched up but still doing their job. Link to comment Share on other sites More sharing options...
tunariaan Posted September 22, 2016 Share klink my of die regte mtbikers sin uitval en die dirt roadies sin in bly Fox3, JXV, dirtypot and 2 others 5 Link to comment Share on other sites More sharing options...
NicoBoshoff Posted September 22, 2016 Share Iwan Kemp, Fox3, slickjay007 and 3 others 6 Link to comment Share on other sites More sharing options...
Gen Posted September 22, 2016 Share But but hubby has them on his Enve bars[emoji53] I am convinced you guys don't read instructions.[emoji23] Edited September 22, 2016 by Gen V12man 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now