Jump to content

Recommended Posts

Posted
1 hour ago, guidodg said:

yup...it's the only high end XC bike left in the world with that pivot...

Not true

The brand new Cube AMS 2022 has the same pivot.

The Norco Revolver launched last year the same.

The Bulls Wild Edge the same.

All bikes I would gladly swing a leg over. To be honest, I am a bike s.... will swing my leg over any bike.

 

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted
1 minute ago, DieselnDust said:

also known as a Horst Link

Yes, but in the context of the conversation, explaining the subtle differences to someone who openly admits they know nothing, using layman term explanations gets the job done better than saying 'Horst link' to which said roadie then says 'what is horst link' and you have to use layman terms...

 

Posted (edited)
15 minutes ago, Jewbacca said:

Yes, but in the context of the conversation, explaining the subtle differences to someone who openly admits they know nothing, using layman term explanations gets the job done better than saying 'Horst link' to which said roadie then says 'what is horst link' and you have to use layman terms...

 

or you direct them to www.google.com and they get the full run down, history et al. plus a dash of learning.

give a man a fish and feed him for a day

teach the man to fish and feed home for a lifetime kind of stuff

imagine we taught math by referring to the variable as a thingymejig.....oh wait..(reviews 2020 matric math results)

Edited by DieselnDust
spellinggggg
Posted
9 minutes ago, Jewbacca said:

It's a metric shock, both the 100mm and 120mm run 190mm eye to eye, so I removed the 7.5mm bump spacer to lengthen the stroke from 37.5mm to 45mm to make it 120mm front and rear.

I have a 2.4 pergatory in the back with lots of space

Thank you for the reply! 

This option as an upgrade to my current situation is looking pretty good. 

Posted
1 minute ago, Jono said:

How about frame weights... Does anyone perhaps know what these weigh in at? Bonus points for ally and carbon ????

I don't know, haven't weighed a bare frame but around 2200gr would be in the right ball park based on the weight of a complete bike similarly specced to a Blur, Scalpel or Epic or roughly 200 r heavier than the top of he line frames for the full carbon version. Carbon /Alloy mix would be around 2400gr and full alloy in the 2800gr range

Posted
3 minutes ago, Jono said:

Thank you for the reply! 

This option as an upgrade to my current situation is looking pretty good. 

I cam highly recommend doing this. The bike at 120/120 with the flip chip on 'slack' feels really planted, fun and responsive. I no longer 'race' bikes, so the fun factor beats the fast factor for me on a mountain bike. 

 

Posted
1 hour ago, DieselnDust said:

better tell that to Cannondale and Pyga. Both recently just released brand new XCO race bikes with Horst Link suspension.

 

On the heavy feeling pedaling I expect that this is a component of the suspension set up. probably too much sag to get a more plush feeling. Horst Link bikes have a narrower set up window for that spritely feeling. To imrove the set up window the engineers have to lower the anti squat (Scalpel) which makes the bike bob a little. They counter this with a shorter stroke shock (Scalpel '21 again). Titan Racing has gone with a pretty standard Horst set up so it really needs more low speed compression or a Brain type suspension unit to get the best of both worlds

I see i am out of date when it comes to the latest bikes. at the time i rode the bike everything was moving away from the Horst Link setup.

to see other bikes coming back to it is interesting to hear. clearing the "newer" (read DIFFERENT) suspension setups are maybe not better.

 

1 hour ago, Danger Dassie said:

Outdated? How so? The kinetic movement is just as efficient, arguably more so than 'flex' ... Sure there's a weight saving and less maintenance on a pivot free area, but far from outdated. And at an average of 20% less cost I'll take it. The sales also prove that it's not as big a detractor. 

Happy to revise my thoughts. if designers are moving back to Horst then its clearing for a good reason.

 

For anyone who is interested i wrote down my thoughts on the Titan Cyper Empire here is the form of a review.

i ended up buying a Scott RC 900 SL and i love it. funny its angles might be a little dated but it feels fantastic to me. i increased the front from 110mm to 120mm to gain some more comfort and slightly slacken the head angle.

 

 

Posted
43 minutes ago, Furbz said:

I see i am out of date when it comes to the latest bikes. at the time i rode the bike everything was moving away from the Horst Link setup.

to see other bikes coming back to it is interesting to hear. clearing the "newer" (read DIFFERENT) suspension setups are maybe not better.

 

Happy to revise my thoughts. if designers are moving back to Horst then its clearing for a good reason.

 

For anyone who is interested i wrote down my thoughts on the Titan Cyper Empire here is the form of a review.

i ended up buying a Scott RC 900 SL and i love it. funny its angles might be a little dated but it feels fantastic to me. i increased the front from 110mm to 120mm to gain some more comfort and slightly slacken the head angle.

 

 

 

 

Its not so much about "better" but what the designer wants to achieve.

Cannondale wanted to include a flex pivot in the 2008 Scalpel carbon but Specialized blocked it so they stuck to the flexing chainstay rather than have a flx pivot plus a main pivot. The Horst Link patent covered two pivots along the chain stay. The patent has expired and Specialized opted to not renew it so its now a free to use patent so more bike companies will opt to use it if it suits the design objective. Cannondale opted to go back to their original design intent for several reasons including  being able to better tune the leverage ratio through the travel. Their flex pivot Horst Link only comes into play through the mid stroke toward the end whereas other Horst Links with a bearing pivot come into play earlier in the travel. So the Cannondale behave like a single pivot initially and then as a Horst link further into the travel. This delivers a really bottomless feeling of travel through the 100mm of travel.

The move to flexing seat stays does allow a lighter set up through removal of extra material and two bearings  as well as a stiffer rear triangle. Pyga and Cannondale have got around this problem through design. TitanRacing Cypher rear triangle isn't as beefy as the other two but flex in the rear isn't something complaine about so I assume that either design pathway is currently good enough, unlike 20years ago

Posted (edited)
21 minutes ago, DieselnDust said:

 

 

Its not so much about "better" but what the designer wants to achieve.

 

Exactly this.

Often what is marketed as "better" is, in fact, either just proprietary or new.

Most suspension designs can be very good if they are designed well and, in the same vein, any suspension design can be *** if it is badly designed.

These days, with the design technology that is available, it's quite difficult to find truly terrible suspension, unless you are looking at unbranded trash or the very entry level cheapies.

Anyway, "better" is a contextual term. What is better on an xc bike is not necessarily better on a DH bike.

Edited by Trashy
Edit
Posted
1 hour ago, DieselnDust said:

 

 

Its not so much about "better" but what the designer wants to achieve.

Cannondale wanted to include a flex pivot in the 2008 Scalpel carbon but Specialized blocked it so they stuck to the flexing chainstay rather than have a flx pivot plus a main pivot. The Horst Link patent covered two pivots along the chain stay. The patent has expired and Specialized opted to not renew it so its now a free to use patent so more bike companies will opt to use it if it suits the design objective. Cannondale opted to go back to their original design intent for several reasons including  being able to better tune the leverage ratio through the travel. Their flex pivot Horst Link only comes into play through the mid stroke toward the end whereas other Horst Links with a bearing pivot come into play earlier in the travel. So the Cannondale behave like a single pivot initially and then as a Horst link further into the travel. This delivers a really bottomless feeling of travel through the 100mm of travel.

The move to flexing seat stays does allow a lighter set up through removal of extra material and two bearings  as well as a stiffer rear triangle. Pyga and Cannondale have got around this problem through design. TitanRacing Cypher rear triangle isn't as beefy as the other two but flex in the rear isn't something complaine about so I assume that either design pathway is currently good enough, unlike 20years ago

Thanks for the extra info.

some good knowledge you have there!

56 minutes ago, Trashy said:

Exactly this.

Often what is marketed as "better" is, in fact, either just proprietary or new.

Most suspension designs can be very good if they are designed well and, in the same vein, any suspension design can be *** if it is badly designed.

These days, with the design technology that is available, it's quite difficult to find truly terrible suspension, unless you are looking at unbranded trash or the very entry level cheapies.

Anyway, "better" is a contextual term. What is better on an xc bike is not necessarily better on a DH bike.

100% agree!

i'll say right now, if a medium Titan Empire Carbon pops up on the classifieds i will have serious trouble not buying it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Settings My Forum Content My Followed Content Forum Settings Ad Messages My Ads My Favourites My Saved Alerts My Pay Deals Help Logout