The "I need something you might throw away" thread

[SteadyCycles]

Does anyone have a 12T or 13T fixed sprocket I can buy from them or know where I could find them in SA? 

Thanks in advance 

[Dexter-morgan]

On 4/5/2022 at 8:31 PM, Sid the Sloth said:

I think you need to start a thread titled "I have something you might need" 🤣

There is, its called the "salvage thread" or something to that effect.

Edited April 8, 2022 by Dexter-morgan

[Dexter-morgan]

9 hours ago, Gazzastead@gmail.com said:

Does anyone have a 12T or 13T fixed sprocket I can buy from them or know where I could find them in SA? 

Thanks in advance 

Have you tried, Rapide?

[Prince Albert Cycles]

On 3/25/2022 at 10:53 AM, King Pluto said:

Looking for a friend.

 

My friend is moving over his Campagnolo groupset from his Bianchi to a Dogma F8 and is looking for a F8 hanger and a braze-on campy derailleur as he's got a clamp on derailleur. Willing to pay.

TIA.

The moving part of the fd can be separated from the clamp part then it should fit on the brazed on clamp.

[NotSoBigBen]

1 hour ago, Prince Albert Cycles said:

The moving part of the fd can be separated from the clamp part then it should fit on the brazed on clamp.

If I remember correctly some can and others can't?

[Sepia]

Is anybody able to help me with 160mm square taper cranks with approx 10mm offset?

Want to try something as my one leg is 20mm shorter than the other.

Colour etc is not important. 

Thanks 

[King Pluto]

3 hours ago, Prince Albert Cycles said:

The moving part of the fd can be separated from the clamp part then it should fit on the brazed on clamp.

But won't that need another piece that that connects to the braze on itself?

[King Pluto]

2 hours ago, NotSoBigBen said:

If I remember correctly some can and others can't?

Same

[Rouxenator]

Snuffed out in their prime. Never got to put 10,000km on these, just look at how much tread they still have left.... Not typical behavior for me but they just won't hold air. Rode 10km with the one completely flat. 

[Hairy]

11 hours ago, Rouxenator said:

Snuffed out in their prime. Never got to put 10,000km on these, just look at how much tread they still have left.... Not typical behavior for me but they just won't hold air. Rode 10km with the one completely flat. 

they may not hold air due to the fact that they have more holes than a sieve 

[Rouxenator]

3 hours ago, Hairy said:

they may not hold air due to the fact that they have more holes than a sieve 

Indeed, and the sealant was so easy to remove, it was a basically dry latex. Thankfully a local hardware shop here on the West Coast had some cheap Chinese 26x1.95 tyres and tubes so a nudge over R300 and I am back on the road. 

[Me rida my bicycle]

The tops are for the big guys (XXL) 

Not used a lot still in good condition. 

Tyres are all 29er, Maxxis Ardent 29x2.25(new) , Maxxis sphinx 29x2.1(x2 used) and a Kenda Small Block eight 29x2.2(new) 

Not tubeless 

Free to anyone who needs it. 

 

Edited April 17, 2022 by Me rida my bicycle

[Chip]

May I have the tires please

[Steady Spin]

Purgatory and Butcher 29x2.3 looking for a deserving home  

Collection in Doringkloof Centurion 

Plenty of tread left on both. Purgatory has a plug but both hold air perfectly setup tubeless. 

Edited April 17, 2022 by Steady Spin

[Me rida my bicycle]

2 hours ago, Chip said:

May I have the tires please

Send me a pm to arrange collection. I'm in northern suburbs Cape Town. 

Edited April 17, 2022 by Me rida my bicycle

[RobertWhitehead]

9 hours ago, Steady Spin said:

Purgatory and Butcher 29x2.3 looking for a deserving home  

Collection in Doringkloof Centurion 

Plenty of tread left on both. Purgatory has a plug but both hold air perfectly setup tubeless. 

I will gladly take it off your hands.