mahleu Posted October 23, 2020 Posted October 23, 2020 So I have a Fox F32 (Evolution series) and I have a nice carbon rim on a TA hub (looks carbon but could be a sticker). Everything should be happy but when I put them together the disk makes contact with the fork. I think about 1mm sideways and it would be fine. Other wheels are fine in the fork. Any suggestions? I can make a spacer for one side and grind down the opposite end cap but if there's a better way i'm open to ideas. I'll take some pics later. Using a very bent backup wheel in the mean time.
Captain Fastbastard Mayhem Posted October 23, 2020 Posted October 23, 2020 So I have a Fox F32 (Evolution series) and I have a nice carbon rim on a TA hub (looks carbon but could be a sticker). Everything should be happy but when I put them together the disk makes contact with the fork. I think about 1mm sideways and it would be fine. Other wheels are fine in the fork. Any suggestions? I can make a spacer for one side and grind down the opposite end cap but if there's a better way i'm open to ideas. I'll take some pics later. Using a very bent backup wheel in the mean time.Are the fork and hub the same axle standard? Ie boost / non boost etc MORNE and DieselnDust 2
AdamA Posted October 23, 2020 Posted October 23, 2020 (edited) Does the TA hub have endcaps, or more importantly is it missing an endcap Some hubs could be converted to 9mmQR or 15mmTA with changing the endcaps Example from MAVIC https://shop.mavic.com/en-int/front-axle-adapters-oc0671.html#1040=3519vshttps://shop.mavic.com/en-int/front-axle-adapters-oc0671.html#1040=3929vshttps://shop.mavic.com/en-int/front-axle-adapters-oc0671.html#1040=3924 Edited October 23, 2020 by AdamA
dirtypot Posted October 23, 2020 Posted October 23, 2020 Going for the third option here... Have you loosened and re-centred the brake caliper? dasilvarsa 1
DR ◣◢ Posted October 23, 2020 Posted October 23, 2020 Going for the third option here... Have you loosened and re-centred the brake caliper?Sounds like the disc itself is rubbing. Nothing to do with the caliper.
JacBrand Posted October 23, 2020 Posted October 23, 2020 Sounds like your hub axle was installed the wrong way around. It could be that the hub uses different size (thickness) end caps on the disc and non disc side of the wheel. EddieV 1
Pure Savage Posted October 23, 2020 Posted October 23, 2020 Those must be some massive photos if still not loaded after an hour! s14phoenix, AdamA, Jewbacca and 2 others 5
MORNE Posted October 23, 2020 Posted October 23, 2020 Those must be some massive photos if still not loaded after an hour! Jewbacca 1
Jewbacca Posted October 23, 2020 Posted October 23, 2020 PRRR whirrrr SSSCCCLLLLLL prrrrr PING PING dongledingdingdingdingding WWWHHHRRRRRR Dial up was rad.... While I am an invalid and can't even play guitar, I may try to synthesize a track using only samples and Dial up noises..... I reckon I will post it here before this picture is uploaded! TheoG, LBKloppers and MORNE 3
MORNE Posted October 23, 2020 Posted October 23, 2020 PRRR whirrrr SSSCCCLLLLLL prrrrr PING PING dongledingdingdingdingding WWWHHHRRRRRR Dial up was rad.... While I am an invalid and can't even play guitar, I may try to synthesize a track using only samples and Dial up noises..... I reckon I will post it here before this picture is uploaded! Do it. https://youtu.be/cM_sAxrAu7Q Mtree and Jewbacca 2
Jewbacca Posted October 23, 2020 Posted October 23, 2020 Do it. That is amazing!!!! TheoG, Mister B, Mtree and 1 other 4
mahleu Posted October 23, 2020 Author Posted October 23, 2020 Sorry to keep everyone in suspenders. Pics here. Disc is touching the brake mounts (on the fork). Have tried without caliper attached and same thing.
mahleu Posted October 23, 2020 Author Posted October 23, 2020 Are the fork and hub the same axle standard? Ie boost / non boost etc Both non-boost Does the TA hub have endcaps, or more importantly is it missing an endcap Some hubs could be converted to 9mmQR or 15mmTA with changing the endcaps Have both, they don't fit the opposite sides. Going for the third option here... Have you loosened and re-centred the brake caliper?Yes, touches even with no caliper.
DieselnDust Posted October 23, 2020 Posted October 23, 2020 (edited) Looks like a quick release set up What is the part number of the disc rotor? and what disc brakes are fitted? Edited October 23, 2020 by DieselnDust
Butterbean Posted October 23, 2020 Posted October 23, 2020 You sure thay disk is mounted the right way around?? Writing on the outside? DieselnDust, Pure Savage, Spoke101 and 1 other 4
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now