Eddy Gordo Posted December 21, 2016 Share Stretch@ why don't you use lap-joints on the table brace X? I noticed you did the same on your previous build. And Woodoc 50 Marine would be probably the best solution not to foul clothing I just love woodoc marine. I use it on almost everything Ed-Zulu and Stretched@Birth 2 Link to comment Share on other sites More sharing options...
Shebeen Posted December 21, 2016 Share you okes are far too damn good for me, but I ain't intimidated! I put this up on the kids thread, but here is my attempt at building a wooden bike for my son (couldn't find anything that fits him, hence the relaxed/cruiser geometry). did some searching on the web and just slapped this all together with off cuts from the garage. hardest thing was the headset - i got a bit fancy and used an old external BB set. wouldn't do that again. This bike will go up on a wall soon (I need the wheels back), so will probably make some wooden wheels for show. Eddy Gordo, Stretched@Birth, Long Wheel Base and 8 others 11 Link to comment Share on other sites More sharing options...
Captain Fastbastard Mayhem Posted December 21, 2016 Share That's awesome! Link to comment Share on other sites More sharing options...
Stretched@Birth Posted December 28, 2016 Share A pile of "reject" timber Was cut into components To make a picnic table Now to treat it, any hub wisdom? I was going to spray it with 3 coats of Woodoc 50 (Marine), but not 100% sure that's the right solution? In situ, needs another coat or 2 of Woodoc, but with the crap weather, it's gotten wet all week... hopefully it's going to dry soon and I can sand and treat it again. ScottCM, ZakAttak, Long Wheel Base and 1 other 4 Link to comment Share on other sites More sharing options...
dev null Posted December 28, 2016 Share Wish we had some of that 'crap' weather. It is as dry as a tinderbox here. Seems the whole of the WC is ready to go up in smoke. Well, me have been so lazy lately, and with the dry heat I ignored my garage come workshop like the plague. Edited December 28, 2016 by Moridin Amberdrake 1 Link to comment Share on other sites More sharing options...
l4y3rcake Posted January 5, 2017 Share My mom has given me the below table that used to belong to my gran. Its solid kiaat and around 80 years old. I'm not sure what to do with it. Should i sand it down and give it a coat of oil or leave it as is? The other thought i had was selling it and getting something more modern. What would it be worth? its a 6 seater. Link to comment Share on other sites More sharing options...
Pants Boy Posted January 5, 2017 Share Unfortunately I've come to realise that old furniture (20 years+) only has sentimental value. A light sand and proper oiling will make it look rather new and spiffy and may raise the selling price a bit. I'd reckon you'd be lucky to get R2000 for it. Link to comment Share on other sites More sharing options...
l4y3rcake Posted January 5, 2017 Share Unfortunately I've come to realise that old furniture (20 years+) only has sentimental value. A light sand and proper oiling will make it look rather new and spiffy and may raise the selling price a bit. I'd reckon you'd be lucky to get R2000 for it.Thanks Pants Boy. That's what I thought. So some elbow grease it is. Link to comment Share on other sites More sharing options...
the nerd Posted January 6, 2017 Share I was offered this table as a restoration project as it had been standing outside for about 8 years. Its a mix of Oregon pine and american pine, the table was estimated to be about 100 + years old and came off a farm in the Namaqualand. Started out pretty rough as you can imagine. Stripped the table down to components and found the top had been chopped up and mixed up. Cleaned the original frame up and used some reclaimed Oregon flooring and recreated the in lay, its all tongue and groove and left "loose" for movement. I'm now two coats in on polywax with wet sanding in between. Been quite a holiday project http://uploads.tapatalk-cdn.com/20170106/e1913100d875cd2b96514543f7ffcc74.jpg http://uploads.tapatalk-cdn.com/20170106/ba86695401262f8ad7cdfb588cff381c.jpg http://uploads.tapatalk-cdn.com/20170106/954444e0485e23f888962a047404a152.jpg http://uploads.tapatalk-cdn.com/20170106/ceddb0997dcc5ec65c511eaf6209f682.jpg http://uploads.tapatalk-cdn.com/20170106/881564482474c69bccef2d66af24619b.jpg Gandalf, Long Wheel Base, Pants Boy and 11 others 14 Link to comment Share on other sites More sharing options...
Tuxstir Posted January 19, 2017 Share Anybody want some free wood..On Dekmar Rd, Wadeville. see they've started to cut it up into half meter segments Link to comment Share on other sites More sharing options...
Skylark Posted January 19, 2017 Share Anybody want some free wood..On Dekmar Rd, Wadeville. see they've started to cut it up into half meter segmentsIMG_20170117_162307.jpgEucalyptus? How would you have planks cut out of the logs and how much would that cost? Link to comment Share on other sites More sharing options...
Marius Posted January 20, 2017 Share If you guys are interested in branding your wooden creations with a logo, we manufacture branding dies. I've got some examples on your FB page: https://www.facebook.com/Bros-Engraving-cc-249590071725952/?ref=bookmarks Skinnyone, Stretched@Birth, the nerd and 2 others 5 Link to comment Share on other sites More sharing options...
Berg Man Posted January 20, 2017 Share If you guys are interested in branding your wooden creations with a logo, we manufacture branding dies. I've got some examples on your FB page: https://www.facebook.com/Bros-Engraving-cc-249590071725952/?ref=bookmarks That's cool. Rough estimate on price? You can pm me if needed. Link to comment Share on other sites More sharing options...
Skinnyone Posted January 20, 2017 Share Eucalyptus?How would you have planks cut out of the logs and how much would that cost?Generally eucalyptus should be processed when still wet - i.e. chop it down and process the wood straight away. When it gets too dry it is like cutting concrete. My dad ran a tree felling business many years ago and he would not touch a dead or dry eucalyptus tree as it would destroy the chainsaw blade and chain pretty damn quick. So if you do get it processed - planked then it may cost a pretty penny... Skylark and Ed-Zulu 2 Link to comment Share on other sites More sharing options...
Skinnyone Posted January 20, 2017 Share I generally work with slightly softer woods and in a slightly smaller scale Bobbo_SA, Captain Fastbastard Mayhem, Gandalf and 10 others 13 Link to comment Share on other sites More sharing options...
Ed-Zulu Posted January 20, 2017 Share As above - all true, Sawmilling operations are always wet operations for a reason 1. Tool durability goes out the window on dry material (that specific tree in the picture is probably in excess of 50 years old and rock hard)2. Drying needs to happen in plank form when placed in stacks so the results are consistent to the species. Yes, you can process dry, but a blue gum tree is not worth the effort. Collect the wood, chop for braai or pizza oven Captain Fastbastard Mayhem, Pants Boy and Skinnyone 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now