Boast about your latest purchases here...

[M L]

On 7/1/2022 at 5:39 PM, ChrisF said:

 

In fairness .... a single 12V gell battery is meant for no more than 20A x 12V = 360W load, based on 2 and half hour load shedding ... with ENOUGH time to fully charge before the next session.

 

 

500W loads will push the battery tooooo hard.

 

A slow charger wont recharge it in time ... next loadshed taking it past 50% .... again shortening the battery life.

 

 

We have a 12V gell system.  Load is managed,  battery never discharged to 50%.  Fast charger takes it to 95% with the Stage 4 short charge intervals.

 

The battery is going on 4 years, and working perfectly.

 

 

The hard reality .... most homes use more than 350W off these systems and work the batteries hard .... then one of the lithium battery types is a MUST 👍

Nice - thanks for the info. Will look into this the next time I do something inverter related.

[AkwA]

20 minutes ago, TyronLab said:

I've given this advice a hundred times before, but de-tensioning the springs on your pedals, making it easier to clip in and out, makes clips much less scary off road. My pedals (PD-M520 Shimanos) have the springs almost completely unwound so I can clip out without thinking about it in almost any direction. If you use good technique (heels dropped) you won't unclip going down and you can still get the pedaling efficiency / fatigue benefit of being clipped in.

I don't know why people ride with their feet bolted into super tight pedals, like a few of my buddies. It makes me moer nervous to ride their bikes, even on the road.

Im actually on the exact opposite of that spectrum.
Normally do ride flats, but when riding clips, I run them pretty tight to not clip out accidentally, and have no issues with clipping out when I have to.
Its all personal preference IMO.

[Chadvdw67]

1 hour ago, TyronLab said:

I've given this advice a hundred times before, but de-tensioning the springs on your pedals, making it easier to clip in and out, makes clips much less scary off road. My pedals (PD-M520 Shimanos) have the springs almost completely unwound so I can clip out without thinking about it in almost any direction. If you use good technique (heels dropped) you won't unclip going down and you can still get the pedaling efficiency / fatigue benefit of being clipped in.

I don't know why people ride with their feet bolted into super tight pedals, like a few of my buddies. It makes me moer nervous to ride their bikes, even on the road.

My pedals are set as loose as they can be, so it isn't that, I really like the clip pedals, but in some situations, especially when riding something blind, flat pedals just make me feel more comfortable 

[mecheng89]

On 6/30/2022 at 10:51 PM, patches said:

Not cycling related... not even running related (as I am far too lazy), but decided to purchase some new "work shoes".

I wear tekkies most days as I walk to and from the bus stop and run around the hospital. I only change into more formal shoes or safety-boots if I'm attending big-boy meetings or wandering around construction areas.

Ashamedly this is the 2nd most expensive footwear I have ever purchased. MX boots being first.

 I know these are an overkill for walking shoes, but I just liked the look 😅

(I better grab my flame-suit for when the running thread peeps see this, haha)

On Running Cloudace

These are exactly what I'm looking for, but for just under R3k, I'm not so sure. 

[DKS]

For those super long endurance ride. 
USWE outlander 3

[Me rida my bicycle]

There's very little that makes me feel better than buying new cycling related stuff. 😁

[MTBRIDER1234]

As promised... here is the bike fully built up in all it's glory

 

 

[DJuice]

Sort of cycling related, means no cycling purchases for the next 3 years.

Can at least watch TDF.

[The Ouzo]

5 minutes ago, DJuice said:

Sort of cycling related, means no cycling purchases for the next 3 years.

Can at least watch TDF.

nice.

 

I just can never understand why these installations are never done neatly. My OCD goes crazy when I see these installations.

[DJuice]

1 minute ago, ouzo said:

nice.

 

I just can never understand why these installations are never done neatly. My OCD goes crazy when I see these installations.

I am with you!

To be honest, I went on the cheap this time round, did not make use of my preferred installer, he only works with Victron and took the cheapest quote. It is in the garage out of sight, except for when I am on the IDT.

[The Ouzo]

5 minutes ago, DJuice said:

I am with you!

To be honest, I went on the cheap this time round, did not make use of my preferred installer, he only works with Victron and took the cheapest quote. It is in the garage out of sight, except for when I am on the IDT.

but its not just your install, I'm yet to see pics of a neat install. I'm sure they exist, I've just not seen them.

[TheoG]

29 minutes ago, ouzo said:

nice.

 

I just can never understand why these installations are never done neatly. My OCD goes crazy when I see these installations.

Will your OCD approve of my install?   🤪😂

[117]

7 minutes ago, TheoG said:

Will your OCD approve of my install?   🤪😂

 

Just DONT take a picture showing the rest of the garage... you'll send Ouzo into ocd rehab

Edited July 7, 2022 by 117

[The Ouzo]

11 minutes ago, TheoG said:

Will your OCD approve of my install?   🤪😂

its better but there are still exposed wires 

[Johnny82]

What about this one?

[Rigardt@Scott]

12 minutes ago, ouzo said:

its better but there are still exposed wires 

Will show you a good example after I get to taking some pics...